Jump to content
SAU Community

Recommended Posts

went to funkoars tonight. ive never seen so many full blown punch ups in a pit before.

nor have a i ever seen a vn do ringies in a bp forecourt before.

nor have i ever seen star force rock up en masse to a music event.

interesting night.

welcome to the dirty south lol, can garuntee more than half that croud woulda been good ol morphies blokes throwin punches

i am not happy with the way the car corners at the moment! turn in yeah it's ok the front feels solid but the rear twist under harsh cornering! i had a look at r34's to why they'feel solid and it turns out the reinforced the rear with some sort of brace behind the rear seats! basically there's too my flex more my liking!

isnt there a dedicated thread for that?

yes, but theres nothing saying i can't post it in here.

well just come back from down the street, there was a heap of people waiting on the side of the road

just waiting to see some bikies. there was a heap of police aswel, think there was 3-4 bus loads of police with

riot gear lol, i swear they had more police assistance than the Queen when she was here haha

sway bars help with body roll! but you can get a hint with the rear that it flexes while turning at higher speeds under acceleration

Replace every bush in your suspension with nolathane or alloy bushes, bracing the chassis wont do much if your still have rubber flexing in the suspension.

sway bars help with body roll! but you can get a hint with the rear that it flexes while turning at higher speeds under acceleration

Have you got cradle bush spacers? If you haven't then what you are feeling is the rear cradle bushes deforming. Get some urethane pineapples and it will improve the feeling 100%.

Ok so having a weird strange problems with my car. Had baffle plate in coz of defect and have just recently put back in my stock ecu with remap including gtr injectors which are still in the car.

My car will run on low revs going thru the gears but as soon as i put my foot down to get it a squirt shoots massive black smoke out and doesn't move literally looses all power until i back of and slowly increase.

HELP PLEASE. I've changed plugs helped for a little

P.S i can still rev the s##t out of it while in nutral with nothing

Done the usual clean/check of the AFM? Could cause a similar problem, obviously the remap supports the bigger injectors yes?

Also, maybe an IC pipe has come off, loosened or one of the silicon joiners might have a crack in it. Check them all, you'd be surprised. Me and Steve both had a similar problem, that was the cause

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • How fast are you doing the downshift? 4th gear was revised multiple times until 1998 to fix this issue. Synchro clips can fall out, synchros can wear. Most likely you're looking at a new transmission unfortunately. If you need to limp it until then double clutch downshifts into 4th.
    • Sorry I was being harsh there, but am I wrong? You can buy a M340i easily, and there's loads available second hand. A lot more workshops modifying them as well. How about getting parts for them? Don't get me wrong, I'd love a 400R, even a 4cyl (I looked at a few V36s before buying my shitbox BMW). Sadly Infiniti died in Aus and we're stuck with importing them as niche vehicles. Supply and demand
    • Probably straight swap for an R32 GT-R? lol
    • Yes I think we changed out the transmission fluid as I had a leak last year so we changed out the seals also. Need to check.    I should have said just change from 5th to 4th gear … down shift. There’s a grind.    I have a new clutch X clutch … but as I said all the changes in other gears are fine. 
    • Change the transmission fluid. I would try Motorcraft XT-M5-QS if you have it in your area for a reasonable price. Also, double check your clutch is fully disengaging. If you are not pushing the clutch pedal to the floor fully for every shift now is the time to start. Make sure the clutch is fully bled. The damper line requires two distinct bleed points to be purged of air or it will not disengage the clutch properly. If either hydraulic cylinders input or output are losing hydraulic pressure in their seals/leaking you can have problems like this. If you've ruled out everything else then the most likely explanation is the synchros are worn and you need to double clutch the shift or rebuild/replace the transmission. The transfer case is discontinued FYI so you may want to rebuild it while you're in there too. If the chain stretches past spec it can do a ton of damage.
×
×
  • Create New...