Jump to content
SAU Community

Recommended Posts

hey ruby if u want ur pipe moved by qualified plumber/gasfitter let me know after u get a quote ill see how much i can better it, and dont call metro's or jims charge u a sh%^ load

Sweet. I'm digging up more area around the piping tonight and taking pics. Will get a quote tomorrow, then spin it your way to see what you can do :)

shut up damo, naaaa a mate at work looking for some weekend work, lol he is trying to pay for his subaru to get a supercharged but the misus wont let him coz they got a house loan, so this way he can fund it :)

shut up damo, naaaa a mate at work looking for some weekend work, lol he is trying to pay for his subaru to get a supercharged but the misus wont let him coz they got a house loan, so this way he can fund it :D

How much room would he normally need to relocate copper pipework. The pipework is some 150mm under ground level and I can trench under its length (4-5m) for a depth of 500mm if that helps. I just need it moved about 500mm away from the house. This will allow for some 300mm clearance for the footings.

Then I can get on with it and fit the purlins and roof sheets asap.

:)

because its was fking diagnosed by someone who knows about RB26's, Steve...

a knock in cylinder 6? so you mean the bearing has lifted in cylinder 6? which is pritty much the same as a spun bearing... cept that you probably wont have to replace the crank, and your block and head should still be in good nick, but is SFA away from being a spun bearing and the same work has be to done to fix it

went to blackwood tyrepower

walked away with the stagea fitted up with four new 235's x 45's on the bjr 17x7" rims

marshal matrac tx ku17

$130ea fitted, will wheel-align after tuning is done wednesday at boostwerks

post-18854-1237185103_thumb.jpg

http://www.skylinesaustralia.com/forums/Mo...er-t258139.html

A fantastic read, especially post #10, i lost my shit.

ROR, that is GOLD!

OK, Damo, now we want to hear your selection for top 4 mods and reasons why.........and if a certain mod comes last I'll sook like a princess

and DamageInc, get someone who knows what they're doing to diagnose it properly......I've heard of guys pulling whole engines out and apart to fix a knock that came from the rear of the bottom end (thinking it was a #6 big end) which turned out to be a loose flywheel.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
    • Time: Saturday 18th January - 9am -10:30am Where:  Cafe By Lamanna 10 English St, Essendon Fields VIC 3041  - https://g.co/kgs/mhVKvAB Registration: So we can give the cafe a heads up on rough booking numbers please rsvp below Registration Link: https://forms.gle/wPtfj9Gp8bvCiouo8
    • Welcome Gabriel. At least your car has a glorious RB and not the shitty CA18. As MBS206 mentioned all the good bits can be added later. Two doors or four?
    • And half of them have been converted to turbos.
×
×
  • Create New...