Jump to content
SAU Community

Recommended Posts

hrmmm looking at upgrading my brakes! right now i don't know what to go for but i've seen a set of project mu i fancy that's a bit pricey i think! something like over 1k for disc and pads! anyone tried project mu?

Edited by nos man

There's a group buy on SAU for rotors + pads, run by rs73 I think his name is, he'll hook you up with a good buy. As for the lines, there's another group buy, $200 or so for ADR approved ones. All up you'd be flirting with the $1000 mark

haha no I wasn't there, lol (all the info is on a public register anyway).

So you still haven't said whose affidavit it was and why (if you did nothing wrong) you didn't contest it yourself.......you don't need a lawyer if you were as prepared as you say you were. It's worth a crack while you're already there if it means saving some $$ and 3 points possibly....what did you have to lose, you're already there and prepared??

If it's all in a public register than you should go look it up you'll find it under 'bent over for running an amber light'. I stated already that it wasn't worth the money for a lawyer to risk losing when it's my word against a cop and I've got 9 points in the bank.

You want me to name to cop that wrote the affidavit? and my name?

Why would I do that?

It's quite clear to me that you obviously hang on every word that any cop has ever typed in an affidavit and believe it's impossible for a cop to get it wrong in an affidavit.

I commend you SLED for being a believer, good on you.

Now I'll cease posting anything else that remotely comes close to the law or law enforcement.

Far out Talbo, if I was you I'd go easy .... that was a big knee-jerk reaction to a fairly harmless (and in fact in some ways reinforcing) post by Sled .... you had better hope he is in a good mood when he reads that, as if he is not I suspect you might get a little holiday from the forums :D

^ wont let me upload decent large songs.

the ones I put up were rather simple. but you get the idea.

Are you on www.mixupload.com.au? Try that out... you can upload your own full mixes, etc. Awesome site.

Hey guys, I was wondering if anyone can explain to me the process of "importing" a car from interstate? Thanks in advance :D

Bring it over, go through Regency to get a ID check, rip a skid on the way to getting your new number plates, win.

quote of the thread

But i always use a rubber even though the gf has the implant. My gf tried to tell me i should go on the pill (male contraception) i told her to just kick me in the balls whilst im asleep.

:D

oh, and a good rick roll in that thread, well played sir.

Pfft, you think thats good, I just fitted some mesh to the grill area of my silvia and it looks fking pro as. I am a winner :D

Tidying up the front bar and taking the twin pipes off later.

Edited by AndrewJZX100
Pfft, you think thats good, I just fitted some mesh to the grill area of my silvia and it looks fking pro as. I am a winner :laugh:

Tidying up the front bar and taking the twin pipes off later.

Pffft, I got a delivery coming today in the form of a nice fat envelope with lots of $$$ :)

F**K YOU TOO DAMO!!!!!!!!!!!!

Cara! I gave you advanced warning about that and you still fell for it :huh:

Anyone amazingly good at removing turbo's from a R32 GTR?

Would like to start saving to get them rebuilt (seals are on the way out, and I want to get rid of that ceramic, pottery wheel) because I want to stay legal... for the moment... :)

Just want to know if it's a huge job or not? I've heard it's pretty difficult!

If I didn't have so much work around the house to do (house extension) I'd be happy to play with a GTR. If no one steps up, I may be able to squeeze an hour or two out this weekend (or next) to help.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Maybe I also should have wrote that a bit better lol. I did come 8th last in English at school during the HSC, ironically spent 2 decades reading/writing specifications and contracts in IT 😂
    • Right, but that's in-cylinder, there's the interaction between that and the TWC which complicates things. Pulling out timing to reduce NOx is a strategy I saw in transitional emissions vehicles like stuff from 1974 or so. The two inlet runner system is interesting but I'm not sure it makes a huge difference as far as emissions goes, is it a tumble valve? I've seen stuff like that even in cars from the late 80s. 
    • Hello all,   so i recently swapped out my rb20de neo with an rb25de neo( engine,transmission, wiring and the diff everything) but i just cant get the gear indication light on the dash to work when i switch to tiptronic mode. Note there is a steering wheel switch beside the shifter and i dont have that. I did notice yesterday while switching to tiptronic that the indicator on the dash started to work but it didn't afterwards. Does anyone know how this actually works? Or do i still need that steering wheel switch to be connected and on for that gear indicator to work?
    • Hence why I said earlier that I don't think the turbo Neos ever would have actually qualified as an LEV. I suspect the only actual LEVs that came out of Nissan were the NA Neos. Still call them all Neos. They all stil have the Neo-ness. Just that they don't all qualify as as LEVs.
    • It will give gains, but you wont hit 600 It will give gains but it wont get you to 600 imo. You will also sacrifice low down and you will be adding extra volume if you port match it, more so if you port the plenum runners depending and how its done I think the only time youre going to see about 100hp gains is if the car is making well over 1k kw I do have a spare set that I was going to test with, but i dont actually think there is anything worth getting going larger. I did a fair few S14/S15 and the standard TB is fairly small, I went to 60 and in some cases 64mm which is significant over the stock unit. You can also get some weird ratio changes. I think 20kw will be a stretch on a roller dyno. If I had it apart I might mill the shafts a little and not expect much, I think the stock size is still pretty good for a street/track car even with larger capacity. I might change diameter it if its a drag only car
×
×
  • Create New...