Jump to content
SAU Community

Recommended Posts

nero is the problem, even tried burning through windows, still = fail

hahah >insert witty quote about redheads and burners<

sorry but how is nero the problem?

If the burn fails during the procedure, your burner might be faulty.

If you can't even get the file into a filesystem template and prepare the image, then give up and hire a nerd for half an hour. Then sell your PC and buy an abacus.

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

A rebuilt high flow i would of thought would be better than a 2871

52T 2871 will do 250rwkw and a 56T will do 270rwkw, i don't see a high flow doing that. Garret rate them at 460 and 475 hp at the engine respectively.

Edited by D_Stirls
Parked our car in Jetty Road, Largs North on Saturday afternoon.

We had two (2) Port Power season tickets sitting on the dashboard.

Some bastard broke into the car and LEFT TWO MORE!

Wow.... I guess they couldn't have been true port supporters

after all, you didn't mention that they'd stolen your car radio :D

-D

Dammjust got back from my regency appointment and failed :D.

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

cut metal parcel shelf........you'll be lucky not to get black listed for that (as the parcel shelf is usually part of the structural steel

might be worth checking out what nisswreck can do for you though

heres the question scott, how did you not know your headlight was out? i can pick it on any car i drive (especially at night).........and i woulda checked all my lights before going anywhere near regency anyway

Dammjust got back from my regency appointment and failed :D .

Got done for tiwsted brake line but it passed the brake test.

6 x 9 speakers in the back so they cut the metal parcel shelf and parkers and low beam on 1 side.

Does any1 know hwo or where i could get to fix/ put in a new metal parcel shelf???

please help

are you kidding me for 6x9's ???? that means you could defect a lot of cars in this town. I dont care for 6x9's but that is petty shite , its going to be expensive to fix labour wise unless you can weld, rear window might have to come out just to keep from breaking it ,, that sux big time

try a body shop for install if you dont want to attempt it

anyone have about 20-30cm or so of 3M automotive double sided tape laying around? The tough stuff they use to stick on car trims, etc. NEED some.

superchump doesnt sell the good stuff, not the one down south anyway

you need the red 3M tape , used for trim, call up any auto paint store for it, or rare spares on south rd

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • They're supposed to not be compatible.
    • Evening fam, Pretty much what the title asks, I have looked all over and can’t find a proper answer expect one post from almost a decade ago which is vague. ive seen photos and they look pretty much identical, would an r33 GTR N1 reo work on an r32? reason I ask is they are cheaper to buy… $700 compared to 1k+ for an r32 n1 reo
    • Couldn't help myself, had to start putting it together.... It really is a solid bit of kit.  Probably stronger than i would have made it myself to be fair! 🤣🤣 Sweating like a pig after that.  Bloody hot and muggy day today, time for a swim now!
    • Yeah was thinking that. I've had the car go lower idle possibly around 650rpm every once in a long time after pouring fuel and would sound quite rough like a misfire, almost like it's shit fuel or something but who knows.
    • @Wazmond you are correct, my bad, was not my intent    https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.    I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.    I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.    https://gtrfestival.com.au
×
×
  • Create New...