Jump to content
SAU Community

Recommended Posts

haha thanks :D

it has a few nicks and nacks here and there.. but little TLC and she'll be good :D

ps; i see your edit, Narh, SR20DET with T28BB ;D

if the motor dies, it will be my mission to make a 'Nissan's version of a hatchback skyline'

So that means RB25, and the plastic overface thing for the tail lights + type X lights + GTR bumper + grill + the list goes on..

but the SR20 is running very nice!

Hello everyone, long time lurker fairly new poster.

Just wanting some advice if possible. I am currently looking at purchasing a skyline and am wanting somthing mechanically sound. I have recently found a car and was wondeing if there is anywhere that does pre purchase inspections? I know of RAA etc, but have been told there knowledge of imports isnt great. I am a female without a huge amount of mechanical knowledge and I dont want to be taken for a ride.

Thankyou for your input in advance

you can buy my r33 gtst! 20k with almost everything you need unless you're more into cosmetics

i want a honda :D

NO! NO! NO! NO!!!!!!

Don't EVER mention that word on here again!!

F*cking bullshit place. My entire family has had dodgy dealings with that place, including me.

Don't EVER take ANY car there!! No matter how shit it is!!!!!!

2nd hand wheel bearings, snapping drive shafts, missing nuts... the list goes on.

Never again.

lol ok mate

I used them a while back for rebuilding the R31 driveshaft and some commo work nothing more , they have won many RAA awards for best shop in south.???

but your word is better then the BS awards.

happy customers or disgruntled ones speak volumes over some BS awards

haha, yeah i understand aboutt he cut and paste job, but all the guards are metal, its been engineered with the r32 front on so 100% legal :D

My dad is a panel beater by trade for 18 years, he said it was pretty well done (he is also a gap nazi)

:D be good to see some of your cars at one of these villis nights once the new bumper is done (satay pies FTW)

lol ok mate

I used them a while back for rebuilding the R31 driveshaft and some commo work nothing more , they have won many RAA awards for best shop in south.???

but your word is better then the BS awards.

happy customers or disgruntled ones speak volumes over some BS awards

Yep they were fantastic until Rod retired and his Son Brenton took over. When Rod was heading it, the service was fantastic and no bullshit, either.

Once Brenton stepped in, the place has gone down-hill. My wheel bearing seized on me, so I took the car in (old car) to get it replaced. 2 weeks later, bang... wheel bearing had seized on me and my drive-shaft snapped, too. Went to Rod Prime, confronted them, and Brenton admitted they had used a 2nd hand wheel bearing from U-Pull-It yet charged me full price for a brand new one!! And they even left one of the wheel nuts off!

They also fitted the wrong water pump to the car (how they did that, I'll never know) and then told me I needed a brand new gear box, even though the gear box was fine and had been rebuilt only a few months prior.

Brenton is the rudest prick you'll ever talk to. He has 0 customer service and gives you real attitude. There's plenty of others in the same boat as I'm in, ever since Brenton took over.

Yeah, that is why I went over for the Melbourne Motor Show a couple of months back - to get my new car fix and have a gander at the R35GTR and the 370Z before they officially came out.

haha, yeah i understand aboutt he cut and paste job, but all the guards are metal, its been engineered with the r32 front on so 100% legal :D

My dad is a panel beater by trade for 18 years, he said it was pretty well done (he is also a gap nazi)

:D be good to see some of your cars at one of these villis nights once the new bumper is done (satay pies FTW)

Good stuff, would love to see it IRL but I have never even managed to get my ass down to villis yet.

Dam it I want a pie now.

Yep they were fantastic until Rod retired and his Son Brenton took over. When Rod was heading it, the service was fantastic and no bullshit, either.

Once Brenton stepped in, the place has gone down-hill. My wheel bearing seized on me, so I took the car in (old car) to get it replaced. 2 weeks later, bang... wheel bearing had seized on me and my drive-shaft snapped, too. Went to Rod Prime, confronted them, and Brenton admitted they had used a 2nd hand wheel bearing from U-Pull-It yet charged me full price for a brand new one!! And they even left one of the wheel nuts off!

They also fitted the wrong water pump to the car (how they did that, I'll never know) and then told me I needed a brand new gear box, even though the gear box was fine and had been rebuilt only a few months prior.

Brenton is the rudest prick you'll ever talk to. He has 0 customer service and gives you real attitude. There's plenty of others in the same boat as I'm in, ever since Brenton took over.

gee I didnt know Rod retired , he was good with customer service

but yeah I met brenton and he is a total arrogant dickhead(should never be face to face with customers ever!!!!), didnt realize he runs it now

never mind , dont go to rod prime...lol

just put a 32 rear end on that 180 and it will look sweet as :D just messing, looks pretty nice

getting newbies coming in from all over, hell even why scandys on the forums. thought he woulda scared em off

yes i beat up on the guy alot :D

Edited by Inline 6
I want to get the f**k out of work..... I'm sooooo bored it's beyond funny!

+2 :D slow day at the office.... :[

Price on the Sil 4.3K, i dont expect that much... but 4k firm (i paid that and it was non turbo..) but there are a few issues like it needs new rear shocks, but ill give the person who buys it off me some stocks ones to put in to fix the problem.. that and i think the fuel pump is shitting its self...

Edited by AXTX
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Coming home late at night and driving past the police is the only reason i need one haha And yeh, definitley needs a switch to quickly enable it, dont have time to be getting my phone, opening an app, waiting for it to update etc before being able to make the change
    • Because it is financially convenient for them lol. Why wouldn't they want to give you the lowest possible valuation for your car?
    • Yep. @Duncan also shannons they will rip you dry and will be probably limited on how much you can drive. Also keep in mind that you always have to have it garaged with Shannons, with enthusiasts as per their PDS you can have it 2 times per week on the driveway for example. 
    • I had a generic 4" Varex rear box on my old V8, worked a treat for sneaking home late at night, it was as quite as stock when closed The car was "fairly" loud when open as it consisted of 1" 7/8 headers to 3" catted Y pipe, to 4" single, it did have a resonator in the mid pipe and only the Varex out the back I also hard wired in a Varex dash mount switch, as the key fob thing is a pain to use when driving I wouldn't recommend giving the beans when it is closed though as it creates a large restriction in the exhaust  It also can in very handy when pulled over for "random" breath tests or just cruising past the constabulary   
    • Here is the before and after of the scraping/sanding of the IC pads on the tachometer board for the fix mentioned in this thread. And yes it worked fine after. Just a note if you change any components on the board the tach calibration can be wrong showing the wrong idle etc...only problem is once it is installed back in the cluster you can't get to it to adjust...ouch! My fix was to cut out the calibration pot (the blue one) from the board and run it with two wires to the fuse panel under the dash where I could adjust the idle calibration once everything was installed. And yes I soldered everything up again including the half soldered components either side of the IC in my photos                                
×
×
  • Create New...