Jump to content
SAU Community

Recommended Posts

only reason i came up with the idea

we had 17mm of rain in 24hrs this time last weekend at pt augusta. turned all the clay based dirt roads into shit basically

had 20t of loaded mack dump hookin sideways at 10kph................thought this might be the key i was missing haha

Matt this is what you want and it will fit;

97d0_1.JPG

http://cgi.ebay.com.au/TOYOTA-LANDCRUISER-...93%3A1|294%3A50

That's a beautiful piece of machinery there Dale.....that's a good price too IMO.

I've got the updated version of that engine in my truck but with 2 snails hanging off it.

Crap!

Got the news this weekend that my uncle is in surgery at the RAH ICU and he's not expected to make it. That will be another uncle I'm losing to bowel cancer. He is a top bloke and has lived a good life. Hopefully he's got some fight left in him. Bowel cancer is no joke people. I get tested every two years. Its only $36 every two years to ensure you can keep enjoying modding cars for years to come.

Crap!

Got the news this weekend that my uncle is in surgery at the RAH ICU and he's not expected to make it. That will be another uncle I'm losing to bowel cancer. He is a top bloke and has lived a good life. Hopefully he's got some fight left in him. Bowel cancer is no joke people. I get tested every two years. Its only $36 every two years to ensure you can keep enjoying modding cars for years to come.

thats sad man..hope he has the strength in him to survive through it

Spent the arvo changing coilpacks to not only find out that its not coils causing missfire, but also to snap off one of the bolts that holds the coil in. wicked.

aargh, these bolts are so fragile... i snapped like 3 of them when i had the same issue...

so what have you tried so far to find source of misfiring?

well i took out a set of heavily-siliconed coils and replaced them with a spare set i got with the car, chucked come electrical tape around them first, but no dice, still missing under load. only other thing i can think of is a split in silicone joiners/piping thats only opening up under load? Gonna book it in to Pitlane to get the bolt out and replaced, and see if they can't diagnose it for me.

So you've replaced a dodgy set with another dodgy set? Buy some Splitfires, if the issue persists then you can rule out coilpacks.

As for the bolt, depending on where it snapped, use a set of pliers, wrap it around the thread of the bolt and work it out that way, done that before on my car, easy as piss.

So you've replaced a dodgy set with another dodgy set? Buy some Splitfires, if the issue persists then you can rule out coilpacks.

As for the bolt, depending on where it snapped, use a set of pliers, wrap it around the thread of the bolt and work it out that way, done that before on my car, easy as piss.

^^^ or take the whole cradle out if theres no bolt left on top of it... thats what i had to do...

as for splitfires... that would be my last resort because they are for suckers :ninja:

Edited by Rocky88
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I know it's been YEARS but hunting down that trunk lip spoiler!
    • Absolutely nothing wrong with a Profec or similar. He's on a Nistune, so external boost control is a better option anyway.  
    • I would not replace the gauges. A well setup tune should never require any of that. I'm of the opinion that if you can't safely hand over a car to your parents to drive it's not fit for purpose and more engineering work should be done. Honestly I'm not a fan of external boost controller boxes either but if you have to you can shove the controller into the glovebox or something once it's set up. Tee it off the OEM MAP sensor. Also you probably want to put a two pin plug on the new solenoid, bolting it to the OEM location works. Just separate the wastegate line and compressor outlet so it will work on a 3 port solenoid, kevboost was walked through how to do this on an RB26, same idea just different locations on an RB25. You may have to remove the restrictor in the OEM hoses if they're still in there. 
    • Yep, it's why in Australia we never brought in the 1 child policy like China.  China can't afford to use the shit they make in their own country as it's too much to risk having only one child...  Or maybe that's how they test their shit before they send it to Australia - they use the second kid that families had when they weren't supposed to as the tester?  They weren't supposed to exist in the first place so no loss if they succumb to a work place incident?  🤣
    • It's also the reason neither Duncan or I can own a car rotisserie
×
×
  • Create New...