Jump to content
SAU Community

Recommended Posts

anyone know wat ecu i can go for seeeing as i cant find a CA18DET PFC?

and to lock my diff :(

cheers

Anything wrong with a remap?

It'll do everything and more that a P-FC will do (infact it is better as it retains the knock control that you lose with P-FC) with the exception of the hand controller and if you want something like that just pay $400 for a NIStune board and you can plug it into your laptop and bring up more info than the hand controller will give you.

Edited by D_Stirls
I've never been told off before :)

They only tell you off if by sliding you are going to b causing others to crash into you....which can build up to a massive pile up and many karts being broken lol.....best effort in breaking karts at an event so far has been 3 for my events

it aint how you stand by your kart

ive never been told off either including the 1 time i lost it trying to get it 2 far swideways :(

motivational pics

post-31501-1246449646.jpgpost-31501-1246449660.jpg

Good motivational pic there Dan

If anyone is after Motul Gear 300 75w-90w 100% synthetic gear box oil i have a 25L drum of the stuff. I'm selling it for $32 dollars per litre. In shops this goes for $43+ per L.

Let me know here or via pm if you need some.

Might give you a yell soon Luke, gearbox is well over due for fresh blood

Let me know when your going to get that coz i will most likely need this done to my line as well

so, im lazy and have only just started searching, but i figured id ask anyway...

... anyone know where i can find ecu pinouts for the s14?

Try NS bro

andrew just gave me a call, he's coming by this afternoon to mock up my t/b intercooler piping, and expects to have it ready by tomorrow arvo. :)

Try NS bro

found it about 10 minutes after i posted. :)

well...after sunday's fuel tank issues...monday saw the car struggling to get fuel which saw me creeping up south road towards junkfood corner at 5km/h :( ....the wife took the pump out while i was at the chiro and i found a few clamps loose that were holding the 040 into the stock cradle...moved the pump up and tightened the clamps and test drover...problem solvered.....so i thought...going to work the next day and was getting surge issues and the car was backfiring and carrying on like a pork chop....took the pump out last night..then went to my mates place to pick up my old "holy" tank to get them side by side..the tank i'd bought was out of a S3 R31...my tank was the same on the outside but different on the inside...so i went to my mate that i bought the tank from..and had a look in the back of his S2....exactly the same as my old tank.....There lies the problem...mine is an early 88....one of the first..so it carried on some of the S2's parts....including the fuel tank :) ....tonight im going to grab the tank thats in his spare car...and friday night swap them over on the hoist at my other mates shed over a few bourbons.......Damn skylines!!!!.....Bloody vintage car...

THE END :):bunny::):bunny::blink:

God I love it when you ghetto repair some drift damage and it actually turns out well :P

Munched the front corner of the sil a few nights ago. Nothing major just a bent guard, scraped front bar and parker light was MIA.

Bent the guard mostly back out, masked up the lights and gave her a quick spray and from a distance you almost wouldn't even pick it :D. Just chucked one of those crystal parkers in there (gay looking thing) for now until I get another stock one from JIS tomorrow - then it should be almost back to former glory :P

Now to make sure I avoid Clems tyres on satdy evening :(

geez, this day is dragging on! anyone got any cool shit to post up?

Your not wrong there Damo.....i thought the clock said 4:24pm but that motherf**ker is saying 3.24 now....this is just not right

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...