Jump to content
SAU Community

Recommended Posts

any1 ever had problems putting a bolt on exhaust? cut the old 1 off yesterday and the bolts are stuck in the holes, rusted or something and my car sounds like a truck!!! (end of exhaust= end catback haha)....oh and we had to cut bolts because the old bolts were warn down and rusty.. had to drive it home...safe on private property :blink:

any1 ever had problems putting a bolt on exhaust? cut the old 1 off yesterday and the bolts are stuck in the holes, rusted or something and my car sounds like a truck!!! (end of exhaust= end catback haha)....oh and we had to cut bolts because the old bolts were warn down and rusty.. had to drive it home...safe on private property :blink:

Just take it to an exhaust place mate and they will be able to sort you out in no time

if your lucky theyll defect you, or they could crush ya car for hooning - unnecessary noise section 250c

well better put on a good show then ay or il try talk my way out of it and explain what im doing.. i have to do it either way :blink: ive done all i can from home.. tried knocking it out, drilling it out and it did no use.. they wont crush for that anyway.. i hope

well better put on a good show then ay or il try talk my way out of it and explain what im doing.. i have to do it either way :blink: ive done all i can from home.. tried knocking it out, drilling it out and it did no use.. they wont crush for that anyway

well at least you hope so....

just take back streets and baby the car as much as you can, short shifting, etc. if you just go straight to the closest mechanic i think most cops should be OK about it. I wouldn't do it if you cat isn't there tho as that could result in a very large fine. Also try RAA or a similar place that comes to you, just to get the bolts out/off and put a new system on yourself.

well at least you hope so....

just take back streets and baby the car as much as you can, short shifting, etc. if you just go straight to the closest mechanic i think most cops should be OK about it. I wouldn't do it if you cat isn't there tho as that could result in a very large fine. Also try RAA or a similar place that comes to you, just to get the bolts out/off and put a new system on yourself.

yeh cat is on there mate.. and yeh i chose the closest place.

Hi Peeps :blink:

Whats crackin in SA of late??

I cant find the thread about the new club...(yes I am lazy didnt search very hard)

How is it all coming along?

P.s Guess what!!! Went over to Tassie last month cause getting into Rally now and they have Farmers Union Iced Coffee in like every shop and servo...I was stocked! :P

Hi Peeps :blink:

Whats crackin in SA of late??

I cant find the thread about the new club...(yes I am lazy didnt search very hard)

How is it all coming along?

P.s Guess what!!! Went over to Tassie last month cause getting into Rally now and they have Farmers Union Iced Coffee in like every shop and servo...I was stocked! :P

Its going sweet, its all go. We have a full commitee in place now and the debut event is a dyno day coming up soon.

http://www.skylinesaustralia.com/forums/of...-D-t275144.html

Thats a very clean 33....used to belong to a mate of mine Murry

He lived around my area too and seen that thing around a fair bit.....definitely a good buy there

cheap as too, guy is heading overseas tomorrow, used it as bargaining power. should be able to convert it to manual for less than what he was asking

but yeah its mint

very nice i also managed to get my R33 from a guy who was moving back to Japan, go to love the bargaining power you have.

It still belonged to Murry you dork ;)

what is it...pick on the black kid now.....:)

yeah well since your mate said he had bought it, then it doesnt belong to murry anymore....hence "used to"

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Depending on conversion rates and when you factor in Australian David Jones pricing on fabrication these days, this kit (bolt on affair, zero fab) nearly seems worth every dollar. https://www.spectrummotorsportssolutions.com/products/copy-of-gt-r-rb26-single-turbocharger-kit Their disclaimer: **Please note - While this kit includes everything needed to convert to Single Turbo without additional Fabrication, Professional installation is suggested. The PS reservoir will need to be moved from the stock location, however everything else fits R32/33/34 GTR w/ OEM AC and Power Steering Pump**.
    • I finally figured this out. That green part, can actually be pushed out. Mine was on the wrong angle because I messed around with it. So what needs to be done is the clockspring to be removed (the loom can't be removed so you need to pull the cable towards you to remove it off the shaft then let it rest on something so it's not dangling) Then you just make sure that the 3 green dots form a triangle and that the 3 holes on the steering wheel inserts into the 3 holes on the green part (you need to push out the green part to do this otherwise you'll keep having the issue with the indicators not cancelling)
    • Welcome back, If looking for a quality workshop AK Racing are the go to for everything these days. No fancy socials or attention seeking just quality work and good people. Can do everything from general servicing to full race builds that do very well at local and international events.  
    • Let me know how much you're looking to get! Thanks. 
    • Oh very very true ! I'm honestly thinking about taking my entire R33 series 3 red stitch GTR interiour out of my car, selling it and buying a small house !  I spotted as pair of R400 GTR seats on GumBay on the interweb and they were asking around the 12K mark ! 
×
×
  • Create New...