The Sa Wasteland

[Damo_R34]

is that a 1.06 rear housing Abe?

[scandyflick]

and run an external gate*. that pissy little internal has trouble coping.

*with a big f**k off screamer pipe.

Edited July 22, 2009 by scandyflick

[DamageInc]

got my license back

BUT

1 Demerit Point for 2 and a half years , THEN i can get my P2's

[JMW]

is that a 1.06 rear housing Abe?

Pretty sure the XR6t rears are a 1.06 housing, being a 4ltr motor. I'd be dropping it to a .83 or .6, depending on how you want response to be

[Krishy]

Good luck with that turbo Abe, i've just been recommended a 3076 with .6 rear. Reckons it'll be good for 280rwkw!

Got off the phone to hypergear and he said that would be enough to go about 320rwkw or so....for something like 260-280 he recommended a AT28G2 or something similar to a GT2871R for response and good hard hitting power

Pretty sure the XR6t rears are a 1.06 housing, being a 4ltr motor. I'd be dropping it to a .83 or .6, depending on how you want response to be

Response even from a 0.83 will be laggy as f**k considering the stock ones are 0.48 or something

[scandyflick]

wow... you skyline guys have really small turbine housings. stocker on the sr .64, gtir's have .86.

[Krishy]

dont quote me on those figures Dave.....thats what i have just been told so.....not my own findings and i have f**k all clue when it comes to turbos but others that know there shit will know the figures around it.....

[D_Stirls]

More power for me;

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=220450462580

Edited July 22, 2009 by D_Stirls

[CRoNic...]

got my license back

BUT

1 Demerit Point for 2 and a half years , THEN i can get my P2's

2 and a half years?! I thought it was only 1 year!! They must have changed it.

That's crazy.

[JMW]

Yeah Simon @ Morpowa said it would be pretty crazy, but with the smaller .6 rear response wont be too bad! Wish i had of grabbed the one in the for sale thread. Pump and injectors for me first i think.

Hmmmm and they're on my shopping list too Dale!

On a brighter note, got some cf eyebrows off ebay. Picked them up and both are cracked! Seller is sending 2 more out tomorrow and i get to keep the fecked ones!

Edited July 22, 2009 by Jamesrb25

[DamageInc]

2 and a half years?! I thought it was only 1 year!! They must have changed it.

That's crazy.

Tell me about it

[Aberax]

youre gonna have fun with that turbo on a 2.5...

Woot, thats what i was aiming for.

Good luck with that turbo Abe, i've just been recommended a 3076 with .6 rear. Reckons it'll be good for 280rwkw!

Thanks, ill let you know how i go with this.

is that a 1.06 rear housing Abe?

No, its a .8X (its a 0.8 something)

and run an external gate*. that pissy little internal has trouble coping.

*with a big f**k off screamer pipe.

As much as i would like to, no. It going on my daily.

[scandyflick]

well, external gate is going to be a minimum. seriously. that tiny little internal gate has trouble properly handling the boost.

*correction, smaller turbine housing, might just get away with it.

Edited July 22, 2009 by scandyflick

[rad100]

Yeah Simon @ Morpowa said it would be pretty crazy, but with the smaller .6 rear response wont be too bad! Wish i had of grabbed the one in the for sale thread. Pump and injectors for me first i think.

Hmmmm and they're on my shopping list too Dale!

On a brighter note, got some cf eyebrows off ebay. Picked them up and both are cracked! Seller is sending 2 more out tomorrow and i get to keep the fecked ones!

i got the same ones i reckon.. on didnt fit, and cracked, got new one, sent the wrong one, got new one, still didnt fit right.. cbf afterwards.

there shit!

[JMW]

Yeah thought i remembered reading a post similar! See what the next ones are like i guess

[Aberax]

Yeah, i just picked mine up, hoped on the for sale and saw the same turbo for $1800, i could have saved money....oh well.

The turbo i got is running a 12psi actuator, and according to my research - browsing here and looking at Lithium, Mafia, and Cube's posts, they recommend the 0.8 rear housing. They also said that there is boost control issues, but that only really happens with the non genuine Garrett housings. The rear housing on mine says Garrett, and has 0.8 stamped in the exhaust input :S

[hypergear]

my turbo is now at hypergear, being turned into a 2860. awesome.

Scandyflick Some photos of your hiflowed turbo CHRA (GT2860RS Sleeve bearing spec). Should have housings finished tomorrow.

[heslo]

Ooohhh.... looks the part!

[JMW]

I'd almost consider that porn !

[scandyflick]

... i got a boner.