Jump to content
SAU Community

Recommended Posts

Tint a car do Midnight Express, which apparently is the darkest legal tinting option! Heard good things about it.

Before Steve gets in, i think Ric from Auto Perfection does it too :D

no its not on the 2 front windows - i found out the hard way can be 35% all round but the front windows - no more than 70%

Cara is right i have the widow tinting brochure that i got when my car was being inspected.

Taken from the brochure:

The driver and passenger windows must have a luminous transmittance of at least 70%

The windows behind the driver must have a luminous transmittance of at least 35% unless they are interior windows

The inspector had a good look at the windows in the stag when i was there on Wednesday.

Edited by DSTROY

Umm all these damm rules. :D why can't things be simple.

Thank you for the suggestions. All windows bar the front two are done, the rears do look fairly dark though.

So possibly 70% fronts??

As Andrew has said you can't go past that QFM pads, I'm using the A1RM pads, they have unbelievable cold bite (I seriously couldn't believe it), and i have used them at Mallala and pulling low 1:20's and for 15 minutes and never had any fade. Also done 2 modern Reg' events and i still have another 2 days left in the pads, that's with a few hills runs as well.

They have a 1/2 price rears deal (through GSR RallySport, who's a trader on here) as well and i got free postage as well so that's front and rear 780 degree pads for $190 posted.

Im pretty sure the QFM's are not available for skylines atm. They wont have any for about 3-4 weeks :D

Umm all these damm rules. :D why can't things be simple.

Thank you for the suggestions. All windows bar the front two are done, the rears do look fairly dark though.

So possibly 70% fronts??

My fronts where nearly as dark as the back window on the Stag but i had to rip it cos i got defected, but i'll get them done to match the rears again cos legal tint will look to see though compared to the privacy glass.

70% to be legal, darker if you want to risk being defected.

so, had a bit of trouble moving my seat rail back and forward.

solution, absolutely packed it full of some random loctite grease. (i lol'd at loctite making a product designed to stop shit sticking)

still a bit firm, but whatever, probably just the rails expanded a little when they were being welded and bound up a tiny bit. no biggie, much easier to move than it was.

lol at passed out little guy

off to melbourne tomorrow morning to buy a yellow 02 ford escape for $5999

paid $500 and $90 for air flight. got unrego vehicle permit to drive it back

need to grab 2 tyres in melbourne, fill her up, then drive back.

long day tomorrow me thinks

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haha yea it's a bit of a weird setup at the moment, just wanted to make sure I sorted out any headaches before dyno day. At the moment I've changed the exhaust manifold, turbo and downpipe, 460lph fuel pump and rising rate reg as well as the previously mentioned headstuds and gasket. The nistune was already mapped for the car as it was and drove around for a few months no worries. The plan is to run flex fuel hence the big pump, which I've wired direct to the battery through a relay to avoid voltage issues.
    • Um. Was the ECU the same as the one previously there? I know R33's needed R32 GTST ECU's or other tomfoolery to run Nistune. This is such a wild setup. Most people would plumb in the turbo then not drive the car (i.e tow it to a tuner). What's actually changed since it last ran?
    • I'm a bit stuck with this one fellas, I recently decided to undertake a turbo conversion on my GTS-4, ended up pulling the motor to replace all the seals and do an mls head gasket and arp head studs while I was at it. Everything has gone according to plan, no oil or coolant leaks, compression checked out, and decided to give it a test before I book it in for a tune As it stands right now, the turbo only has oil lines plumbed so that I don't put boost into my untuned engine, and I'm using the factory GTS-T crossover pipe with a maf and poddy as a temporary intake. The car starts with relative ease and idles amazingly, however as the title suggests it really doesn't want to rev up, runs very smooth but almost feels choked out and unresponsive to the throttle, almost like it's running lean or something? I've triple checked my vacuum lines and timing with a timing light, injectors haven't been touched as of yet to avoid flooding the engine and worked perfectly beforehand, new plugs and coilpacks, I've even unbolted the cat just to see if it spontaneously collapsed, no dice The car currently has a nistune r32 gtst ecu installed so I have no way to check for fault codes. At this point I'm a bit stumped. Is this normal behaviour for a car with a turbo bolted onto the exhaust going nowhere? I'd imagine the turbo wouldn't cause this much restriction in the exhaust without the boost going through the intake. Any ideas? If necessary I can link a video of how it responds to full throttle while in neutral.  
    • Insert tab A into slot B?
    • Instructions seem simple enough to understand.....
×
×
  • Create New...