Jump to content
SAU Community

Recommended Posts

looks nice dude!

-D

Thanks :P

If you were down south i would have recommended Southern Drive Shaft & Service Centre at lonsdale. The company is reasonable new, and the owner is a champ, a fairly regular customer of mine. I don't think he would have anything for you in stock though. I will eventually get some whiteline stuff through him. If anyone speaks to him, tell him "His IT guy sent you" :).

I got it through a work mate, ill see if i can dig up where he got it...i dont really recommend it. I had to cut the back out of the fog light for the piping, so its a bit loose. I had to run without the light there for awhile, then i eventually cut the plastic backing and managed to get it to fit, but it needs a bracket made up to hold it properly, but other then that it is okay.

EDIT: Found, lucky i still had the box with model number.

Here - The First FMIC shown.

and

Here

and

Here Again

not sure where he got it, and cant remember how much it cost.

Edited by Aberax
That's the only thing that's stopped me thus far is the reo needing modifcation!

I just passed my defect inspection with my reo bar in the Stagea cut up big time and my skyline had a little trim to the reo bar to fit my 100mm cooler and that passed regency when i had my engine conversion approved. Depends on the inspector i guess.

post-51334-1250687568_thumb.jpg

f**k i hate "RBT's".

every friday and saturday night i work, i never see an rbt to or from work. every other night of the week, i come across at least one.

tonight i avoided 4 of the f**king things.

how f**king pointless is that shit? yeah, slashdance is on tonight, but seriously, wouldnt those resources be better used when people are more likely to drink and drive, like on a friday or saturday night?

i can even find myself a agreeing with rbt's on peripheral days like thursday and sunday, because theyre getting busier in town recently, but monday - wednesday? having a couple pc's out and about pulling randoms over makes more sense than dumb-testing rbt's everywhere.

and just quietly, 3 out of 4 of these rbt's had some poor bastards in imports sitting on the side of the roads with the bonnets up while the cops just waved everyone through.

breath testing my shiny daffodil ass...

Edited by scandyflick
+1 on that, cutting up the reo or bar doesn't jump to mind of things I'd like to do.

Also, was quite amazed when ringing around at tyre prices today. KU31 in 265/35/18

Wheel Worx - $275

Adelaide Radial - $305

Bridgestone - $325

Beaurepaires - $410

I knew Beau would be shit, but wtf!

Same size and same tyre for me, couldn't believe the price differences and went to Wheelworx too.

why buy an off the shelf kit then?

Just jap cores are cheap to buy and are just as good as expensive brand name ones

then all ya get done is get some pipe work made up, so nothing has to be modified

I'd prefer a cooler that has the plumbing come from the same side and doesn't require any hole sawing (removal of washer bottle). I'll continue looking into it, there's quite a bit on these forums :)

I just passed my defect inspection with my reo bar in the Stagea cut up big time and my skyline had a little trim to the reo bar to fit my 100mm cooler and that passed regency when i had my engine conversion approved. Depends on the inspector i guess.

I'm on my second (larger) cooler now in my Stagea and I've not had to come anywhere near cutting my reo bar. :) While my current one is 76mm thick, I'd have no probs with a 100mm thick cooler ... plus there's room for a separate trans oil cooler to be fitted shortly (fitting a 52mm alloy radiator in time for summer).

when D&T did my turbo and inlet setup, they didnt touch the reo.....mind you..there wasnt any aircond crap in the way either.....ran out of gas a long time before i got the car so i just pulled everything out that i didnt need...no condenser means extra cooler room >_<

well i am feeling a lot better then yesterday.....its such a nice weather down in Victor....might take a walk on the beach

Can you do me a favour? Go into the deli down near maccas, and the skate park, and say "Abe says Hi"...you dont have too, just that my mates parents run the place, and he drives a R32 GTR, then his neighbor drives a R33 GTR.

Can you do me a favour? Go into the deli down near maccas, and the skate park, and say "Abe says Hi"...you dont have too, just that my mates parents run the place, and he drives a R32 GTR, then his neighbor drives a R33 GTR.

LOL if i can find the deli yeah then i will pass on the regards

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model. Congrats on your GTS purchase! I'd personally leave it NA.
    • In this thing about this 100% renewal energy stuff I hear no one really talking about anything other than power and fuel really Power and fuel, whilst being a huge part of how we use the billion year old Dinosaur juices, are only 2, of the probably thousands of things that we need to use it for in the chemicals industries for making nearly everything we use nowadays I'm all for a clean planet, but if we want to continue to have all the day to day appliances and stuff that we rely on everyday we will still need fossil fuels Whilst I do love science, and how it can bring innovation, there's really a limit to how far it can go in relation to "going green" As for EV's, unless your charging of your own solar panels, it isn't helping the environment when you consider the the batteries, the mining processes required,  the manufacturing process required, and how long a batteries (read: the vehicle) lasts long term If I was supreme dictator of the world, I would ban the use of sugar for fizzy drinks and food additives and use that for ethanol manufacturing, petrol engines would be happier, and people would be alot healthier  Disclaimer: Whiskey manufacturing would still be required, so says the supreme dictator of the world Same same for all the vegetable oils that get pumped into all our food, use that for bio diesel Disclaimer: the supreme dictator would still require olive oil to dip his bread in This would take some of heat off the use of the use of fossil fuels which are required for everything we use, unless you want to go back to pre 1800 for heat and power, or the early 1900's for plastics and every thing else that has come from cracking ethylene  Would I be a fair and just dictator, nope, and I would probably be assassinated within my first few months, but would my cunning plan work, maybe, for a while, maybe not Meh, in the end in an over opinionated mildly educated arsehole typing out my vomit on my mobile phone, which wouldn't be possible without fossil fuels And if your into conspiracies, we only need the fossil fuels to last until a meteor hits, or thermonuclear annihilation, that would definitely fix our need for fossil fuels for manufacturing and power issues for quite some time  Meh, time for this boomer to cook his lunch on his electric stove and then maybe go for a drive in my petrol car, for fun    
    • It really helps that light duty vehicles have absolutely appalling average efficiency due to poor average load. Like 25% average brake thermal efficiency when peak is somewhere around 38% these days. So even a 60% BTE stationary natural gas plant + transmission and charging losses still doing much better with an EV than conventional ICE. And that's before we get into renewables or "low carbon nonrenewable" nuclear which makes it a no-brainer, basically. In commercial aircraft or heavy duty diesel pulling some ridiculous amount of weight across a continent the numbers are much more difficult to make work. I honestly think in 5-10 years we will still be seeing something like the Achates opposed piston diesels in most semi trucks running on a blend of renewable/biodiesel. Applications where the energy density of diesel is just too critical to compromise. CARB is running trials of those engines right now to evaluate in real world drayage ops, probably because they're noticing that the numbers just don't work for electrification unless our plan is to make glorified electric trains with high voltage wires running along every major highway and only a token amount of battery to make it 30 miles or something like that after detaching. Transport emissions is not insignificant especially in the US, but yes there's a lot of industrial processes that also need to be decarbonized. I agree the scale of the problem is pretty insane but EDF managed to generate ~360 TWh from their nuclear reactors last year and this is with decades of underinvestment after the initial big push in the 70s and 80s. I don't think the frame of reference should be solar-limited. France is not exactly a big country either. Maybe it doesn't work everywhere, but it doesn't have to either. We just can't live off of fracking forever and expect things to be ok.
    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
×
×
  • Create New...