Jump to content
SAU Community

The Sa Wasteland


Cubes
 Share

Recommended Posts

Go to a place that offer a freee battery test, they normally test if its the alternator because it wont keep charge (drops below 11volts when reved at 2000rpm)

smile and drive away :)

Edited by AXTX
Link to comment
Share on other sites

hey Krishy. how was the cognac mate ? fin it all ?

It was like the nectar of Gods mate....PM sent

I just made the hottest fkn lamb curry and for the first time ever struggled to even consume it!!! Great excuse to cool it all down with beer :)

Nothing is every too hot for me...also beer doesnt help it will intensify the heat lol

pritty sure there is a guide on the site??

also i thought that the 040 is not a direct fit replacment?? but maybe thats just for gtr's

The Bosch 040 that i use in my car went in without problems....but i can assure you that it does have pickup problem once it goes below 1/4 tank.....tried it once to test it out....and on a hot day the car just cut out.....still had 1/4 of fuel in there chucked in 5 litres it was fine enough to get to the servo....never doing it again lol

Hence why i am thinking of getting NISMO GTR replacement one....similar to the OEM one

Link to comment
Share on other sites

Nothing is every too hot for me...also beer doesnt help it will intensify the heat lol

Just an excuse for why there were so many empty cans when the mrs got home from work :( Was fkn hot however

Damo, you can check your battery/alternator with a multimeter if you have one.

Link to comment
Share on other sites

While on the topic of electrics ... who's got a timing light I can borrow? I think someone offered the use of one previously, but I never took the offer (been so damn busy!)

Tried fixing my old one, but it just won't work. I bought it 6 or so years ago for $30 ... the same timing light is for sale now for $60! :rofl:

Also, found the fueling problem with the Stagea. Fitted the stock FPR in last night and its running better. :(

Link to comment
Share on other sites

ahh i am a member, sounds like a plan, thanks Luke!

need to get the 34 retuned as well, Boostin Oz is $150 to see where its at, then they ring and tell you how much it needs and how much it costs. But, they don't work Saturdays, and id have to take time off work to drop off and pick up the car. Also, they are only 10 mins from my house. Southern Hi Tech is $350 for a retune, but they are open Saturdays, so no days off work, but they are down south, about 30-45 mins away. decisions!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Hi there, after a quick google search I found this topic as I am also relocating the battery to the boot of my 1998 GTT. I was just wondering how you got on with installing the re-routing and specifically the installing of the harness protectors? How do they attach? Are they just a simple "click-in" affair, or do they attach with bolts? Does the GTT have all the necessary fixing holes for them, for example, where they locate on the chassis? Any help you can provide would greatly appreciated.
    • Thanks mate, yeah I've heard that alot and i am definitely regretting using the 25 Loom now, i have gone through and traced all the plugs from the 20loom and re wired them into the 25 loom, I have currently got Crank, Fuel and accessory's working, just need to finalise the loom and run the wire for the Ignition (Spark) and it should be running, will update if i have any luck.
    • Cheers lad, when I head over there I'll give it a shot.
    • Stock less likely to carry one like that than urethane, but still can, especially if the bolts are not as tight as they should be. If it's making that much noise you should be able to use a hose as a stethoscope> stick one end in your ear, crouch down and wave it around the various possible noise makers and get someone to lift the front end at the guard lip.
    • Broken actuator rod. Could be one of a couple of them broken. Or, it's locked and the central locking actuator is broken/stuck or the actuator rods between it, the lock and the key barrel are jammed or broken similarly. You'll probably need a locksmith/mechanic who is experienced with using slim tools to reach down next to the window glass to manipulate the mechanism. That's assuming that it is not so severely jammed/broken that nothing useful will move.
×
×
  • Create New...