Jump to content
SAU Community

Recommended Posts

You shouldn't have left Internode in the first place, serves you right :(

Oh, and ep 2 of flashforward was good too :mad:

lol. f**k you. i can has?

I'll be at Vilis from about 6:30 onwards

in that case, im there. :cool:

provided you bring me flash forward. :)

+2 for node... I downloaded season 1 of Transformers(the original 80s one) and uploaded something like 20-30GB of it... same with Pokemon season 1 lol

you know how i know youre gay?

I'll bring for you...

brilliant. :cool:

[quote name='scandyflick' date='2 Oct 2009, 04:49 PM' post='4858689'

its cause adam sucks.

they apparently cap uploads aswell. balls.

shits gonna be frustrating for the next 12 days.

They count uploads OR downloads, whichever is the highest.

Also you can head to the members page and buy yourself a small, or large data block to get yourself unshaped for the rest of this month.

just saw a black VS como with blue flames and well just blue shit all over the bonet and doors with chromies on the front and stockies on the back. fkn lol of the day.

+ gay blue mesh? :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
    • Downshifts are harder on transmissions than upshifts, the input shaft naturally slows down once disconnected from the engine so the synchros aren't doing all the work. There's no "natural" tendency for an input shaft to increase RPM. Something is not right there, I don't have a great answer on what. You can try a dedicated GL4 75W90, I plan to switch to Motorcraft XT-M5-QS which is supposedly a very good 75W90 for NB Miatas which have a weirdly sensitive transmission from the factory. I would chase down why your clutch is making a hissing noise, that's not normal. It might be no big deal but in the absence of anything else to investigate I would look at that.
×
×
  • Create New...