Jump to content
SAU Community

Recommended Posts

looks nice dude!

-D

Thanks :P

If you were down south i would have recommended Southern Drive Shaft & Service Centre at lonsdale. The company is reasonable new, and the owner is a champ, a fairly regular customer of mine. I don't think he would have anything for you in stock though. I will eventually get some whiteline stuff through him. If anyone speaks to him, tell him "His IT guy sent you" :).

I got it through a work mate, ill see if i can dig up where he got it...i dont really recommend it. I had to cut the back out of the fog light for the piping, so its a bit loose. I had to run without the light there for awhile, then i eventually cut the plastic backing and managed to get it to fit, but it needs a bracket made up to hold it properly, but other then that it is okay.

EDIT: Found, lucky i still had the box with model number.

Here - The First FMIC shown.

and

Here

and

Here Again

not sure where he got it, and cant remember how much it cost.

Edited by Aberax
That's the only thing that's stopped me thus far is the reo needing modifcation!

I just passed my defect inspection with my reo bar in the Stagea cut up big time and my skyline had a little trim to the reo bar to fit my 100mm cooler and that passed regency when i had my engine conversion approved. Depends on the inspector i guess.

post-51334-1250687568_thumb.jpg

f**k i hate "RBT's".

every friday and saturday night i work, i never see an rbt to or from work. every other night of the week, i come across at least one.

tonight i avoided 4 of the f**king things.

how f**king pointless is that shit? yeah, slashdance is on tonight, but seriously, wouldnt those resources be better used when people are more likely to drink and drive, like on a friday or saturday night?

i can even find myself a agreeing with rbt's on peripheral days like thursday and sunday, because theyre getting busier in town recently, but monday - wednesday? having a couple pc's out and about pulling randoms over makes more sense than dumb-testing rbt's everywhere.

and just quietly, 3 out of 4 of these rbt's had some poor bastards in imports sitting on the side of the roads with the bonnets up while the cops just waved everyone through.

breath testing my shiny daffodil ass...

Edited by scandyflick
+1 on that, cutting up the reo or bar doesn't jump to mind of things I'd like to do.

Also, was quite amazed when ringing around at tyre prices today. KU31 in 265/35/18

Wheel Worx - $275

Adelaide Radial - $305

Bridgestone - $325

Beaurepaires - $410

I knew Beau would be shit, but wtf!

Same size and same tyre for me, couldn't believe the price differences and went to Wheelworx too.

why buy an off the shelf kit then?

Just jap cores are cheap to buy and are just as good as expensive brand name ones

then all ya get done is get some pipe work made up, so nothing has to be modified

I'd prefer a cooler that has the plumbing come from the same side and doesn't require any hole sawing (removal of washer bottle). I'll continue looking into it, there's quite a bit on these forums :)

I just passed my defect inspection with my reo bar in the Stagea cut up big time and my skyline had a little trim to the reo bar to fit my 100mm cooler and that passed regency when i had my engine conversion approved. Depends on the inspector i guess.

I'm on my second (larger) cooler now in my Stagea and I've not had to come anywhere near cutting my reo bar. :) While my current one is 76mm thick, I'd have no probs with a 100mm thick cooler ... plus there's room for a separate trans oil cooler to be fitted shortly (fitting a 52mm alloy radiator in time for summer).

when D&T did my turbo and inlet setup, they didnt touch the reo.....mind you..there wasnt any aircond crap in the way either.....ran out of gas a long time before i got the car so i just pulled everything out that i didnt need...no condenser means extra cooler room >_<

well i am feeling a lot better then yesterday.....its such a nice weather down in Victor....might take a walk on the beach

Can you do me a favour? Go into the deli down near maccas, and the skate park, and say "Abe says Hi"...you dont have too, just that my mates parents run the place, and he drives a R32 GTR, then his neighbor drives a R33 GTR.

Can you do me a favour? Go into the deli down near maccas, and the skate park, and say "Abe says Hi"...you dont have too, just that my mates parents run the place, and he drives a R32 GTR, then his neighbor drives a R33 GTR.

LOL if i can find the deli yeah then i will pass on the regards

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...