Jump to content
SAU Community

Black Spurs This Friday

ashneel

By ashneel,
in Archived Events

 Share

Recommended Posts

ashneel Grand Master

ashneel

Posted
Posted

hey guys

ok seeing as we have a little interest here are the details:

meet point: PM for meet point details

Date: Friday 12th october

Time: Meet at 11:00pm, Depart between 11:30-11:45pm

also this has been posted on the magna club forums also so there might be some magnas there also but go at you own pace. i havent been there for a while myself so ill be cruising with the pack at the back. if you want to give it a squirt here and there dont do it around other ppl and keep a good distance. we are all sensible ppl here :(

thanks

Ash :)

Link to comment
https://www.sau.com.au/forums/topic/188484-black-spurs-this-friday/
Share on other sites
GTAAAH Mentor

GTAAAH

Posted
Posted (edited)

Yeh, it can be fair evil at night, especially if theres been rain recently, it'll be all dry then some corners will have big patches of wet on them, and the corners have a habit of coming out of nowhere

Great road though and i normally go up at around 2am to avoid traffic (any other time i get stuck behind like 6 caravans that don't understand what a pull-in is)

I'm planning one on nov 3rd, 4th or 5th, have a few cars coming (the day that i can actually drive my gtr) so far if you don't get any interest, will probably be late at night though to avoid traffic

Edited by GTAAAH
LEANBAC Grand Master

LEANBAC

Posted
Posted

me an a group use to go up in the summer, late at night for mountain runs up an back

the road surface is really good, but it is very dark......

i have seen people lose control and crash on that road

some parts of the roads are very narrow, you must watch out for on coming cars an trucks ( an yes even, at that time of night)

if you know your car, then take it for a run. but if you dont then take it easy, an enjoy the nice roads an corners

OVERALL

a very good place to go a drive / run

you can pull some really good G's around some corners :rolleyes:

ashneel Grand Master

ashneel

Posted
  • Author
Posted

thats all i wanna do go for a nice drive on a nice road. im not going up to push the limits of my car around corenrs iv never been through before.

anywhose if you interested in coming we will most likely meet up at brandon park business center around 11ish leaving by 11:30 but ill update the first post so look out for any changes

West Grand Master

West

Posted
Posted
hey guys

myself and dilmah will be heading up to the black spurs friday night around 11pm. if theres enough interest i can post up a time and meet point for others to join us.

iv never been there before so will be taking it easy but if you have and would like to give it a squirt and have fun come down.

thanks

Ash :thumbsup:

Sound good,

At this stage, i'm in, as long as you drive nice and easy so i can catch up in my 1.3 lt gt turbo :).

gsf250 Apprentice

gsf250

Posted
Posted

its a good quick smooth road but dangerous for newbies especially at night. I think ambulance corner still has oil on the road going back towards healesville so take it easy. I ride my bike up there during the week and should be up there on friday during the day either in the car or on the bike im not sure yet.

Factory 5 Mentor

Factory 5

Posted
Posted

Hi Ashneel!

I used to be on fastmagna a few years back!... long live the astron!

for this mini cruise, if its pissing down it would be crazy to do it...

an alternate run up to kinglake is ALOT safer... maybe use it as a backup?

even in the wet the kinglake run is safe.

in the dry the spur is magical

i will pencil myself in. plus a few mates.

Mag86 (worked U12 Pintara-2-tone burgundy/grey)

Nomad. (r31 psykline-purple, white 17")

Fuzzter (off its nuts GC8 WRX-green )

i will also be bringing a CB radio... very handy for relaying messages/warnings

PM me your number and i will SMS my details etc for updates?

ashneel Grand Master

ashneel

Posted
  • Author
Posted
Hi Ashneel!

I used to be on fastmagna a few years back!... long live the astron!

for this mini cruise, if its pissing down it would be crazy to do it...

an alternate run up to kinglake is ALOT safer... maybe use it as a backup?

even in the wet the kinglake run is safe.

in the dry the spur is magical

i will pencil myself in. plus a few mates.

Mag86 (worked U12 Pintara-2-tone burgundy/grey)

Nomad. (r31 psykline-purple, white 17")

Fuzzter (off its nuts GC8 WRX-green )

i will also be bringing a CB radio... very handy for relaying messages/warnings

PM me your number and i will SMS my details etc for updates?

hey mate i dont know the kinglake run

i wouldnt mind doing that tomorrow also. i was gonna scrap this now cause the weather aint looking good tomorrow at all but if kinglake yuou say is still good int he wet we cans till do it but would you be happy to lead???

ill pm you my number

ashneel Grand Master

ashneel

Posted
  • Author
Posted
i dunno guys i don't think its a good idea to go on a cruise where everyone (meaning cops) knows the time and place.

better to meet somewhere and then organize the destination.

lol what??

either way we will have to post up a time and place to meet.

dont worry bout ti dude. only way cops will notice you is if you make them notice you. lay low and no stupid behaviours and you will be all good.

just waiting for a repy from MAG86

i dont know how to get to kinglake so if he can lead us there will be all good unless theres someone else here who knows how to get there.

also my car is still at RE customs. was hoping to get it back today but they said tomorrow. so ill have to wait and hear from them also

EvoMoe Explorer

EvoMoe

Posted
Posted

Hey guys. I'd be down if the weather is ok, althought I've done it when it was absolutely drenched but it was early morning and you could see which way the road was turning. Please PM if this is still all go tomorro night.

Thanks

moe

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TommyR34
      GTR R34 number plates up for grabs

      By TommyR34 · Posted

      bump
    • Murray_Calavera
      Stock rb25det neo questions

      By Murray_Calavera · Posted

      If you are genuinely considering trying to get this engineered, I would strongly advise finding the engineer that is happy to sign that off first before you put the hole in your car.  I've seen cars get defected for this and not be able to be put back on the road as no engineer they spoke to was happy to sign if off.  
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Apologies, while id like to put the MAF as close to the TB and relocate the recirc, this may be too much work. Will most likely end up just putting it on the original AFM spot ( onto/next to the airbox ).  Was going through nistune, found a pretty nifty doc on this. Nistune MAF Notes. Also, i was looking through the bay, and there seems to be a tube/line connected from the A/C to the intercooler piping ( Between the smic and the recirc), what does this do as the crossover fmic piping doesnt have any connection? plumbing? not sure what you call it but the nipple thing ahah.  Also, been reading up more about crossover fmic in regards to the legality of having the hole drilled for the piping, this would most likely need to be engineered right?
    • joshuaho96
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By joshuaho96 · Posted

      My advice is if you need a big build done do it in Japan. The yen rate is so favorable and there are shops that can be genuinely trusted and not micromanaged/carefully monitored every step of the way. Garage Yoshida is obviously my preferred option but they're so busy these days and all interaction with new customers has to be mediated through BBL/Toprank now. 
    • Duncan
      Car Rotisserie

      By Duncan · Posted

      I haven't....but a poorly made one would terrify me. Surely a good second hand one is the go, as they don't work hard and no-one wants to keep one after they are finished with it A big consideration would be the weight of the shell you are putting on it....is it a fully dressed chassis or just the body
×
×
  • Create New...