R32 Gtr Fuel Pump Into Gt-st

[catchmydriftr32]

time for a budget fuel pump upgrade and i'm hoping to fit a fuel pump out of a GTR

does anyone know if the pump will fit in the standard cradle that sits in the fuel tank of my R32 gtst at the moment?

any help appreciated

[abu]

Fits in standard cradle, and you can use standard wiring, the only thing I had trouble with was the filter on the GTR pump sat to low, or in the wrong position?

I just used the GTST filter off my old pump.

Just had to file down a section of the filter for it to fit properly on to the GTR pump, but all reasonably simple!

Edited October 8, 2007 by abu

[battery]

^^ thats correct

you will also need to cable tie/clamp the pump to the bracket.

[abu]

^^ thats correct

you will also need to cable tie/clamp the pump to the bracket.

Oh yep, forgot about the cable tie

Might be better to use a hose clamp to hold it in, as plastic may melt/react with the petrol over time?

I have used cable ties in the past, but I have seen many people use hose clamps in the past, and I am assuming for that reason.

Edited October 9, 2007 by abu

[catchmydriftr32]

thanks guys

sounds like hose clamps are the go

glad i dont have to modify too much.

hard enough getting that cradle and in/out pipes off

cant wait