Jump to content
SAU Community

Recommended Posts

I went with Noltec subframe bushes... these are complete replacements

others are using a aluminium collar top and bottom, over the original bushes, to lock the subfame. this way you don't have to remove the entire subframe and cut out the old ones etc etc

I went with Noltec subframe bushes... these are complete replacements

others are using a aluminium collar top and bottom, over the original bushes, to lock the subfame. this way you don't have to remove the entire subframe and cut out the old ones etc etc

At the moment the sub frame is out. which would be better how much did the Noltec ones set you back? who distrubutes them?

Thanks

they're about 120-150 bucks for the set i think.

for a race car - if you want zero movement the aluminium ones are a complete lock solution.

the noltec ones are polyurethane, and are pretty stiff already in my opinion.

there was a group buy of them on here a while ago, maybe have a poke around in that section?

http://www.noltecsuspension.com/

http://www.skylinesaustralia.com/forums/t1...l&hl=noltec

they're about 120-150 bucks for the set i think.

for a race car - if you want zero movement the aluminium ones are a complete lock solution.

the noltec ones are polyurethane, and are pretty stiff already in my opinion.

there was a group buy of them on here a while ago, maybe have a poke around in that section?

http://www.noltecsuspension.com/

http://www.skylinesaustralia.com/forums/t1...l&hl=noltec

Sorry mate could i bug you once more would you know if the sub frames are the same in the gtr to gts just have different hubs for the rear shock mounts.

Because i brought the car as a shell it didnt have rear end and the sub frame ive got out of a gts4 is bent would you know?

I've heard that the GTSt subframe bushes are slightly different; have a read of this thread:

http://www.skylinesaustralia.com/forums/t1...amp;hl=subframe

how the GTSt and GTS4 subframes differ, I don't know... sorry...

maybe one of the GTS4 owners on here might be able to help?

some admin should probably move this to the Suspension section of the forums too, if they would be so kind :P

I've heard that the GTSt subframe bushes are slightly different; have a read of this thread:

http://www.skylinesaustralia.com/forums/t1...amp;hl=subframe

how the GTSt and GTS4 subframes differ, I don't know... sorry...

maybe one of the GTS4 owners on here might be able to help?

some admin should probably move this to the Suspension section of the forums too, if they would be so kind :O

Thanks mate helped heaps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...