Jump to content
SAU Community

Recommended Posts

thats what I was thinking the GTRS but there are more things to consider with the Stagea as being AWD there is no issue with traction so something like a HKS 3037 may be an option or a large garrett GT3040 etc, but I'm thinking GTRS as with the added weight the larger turbos may be even laggier than they would be on a skyline.

I will be modifying the stagea... ther only decisions im going to have to make is which turbo and ecu.. Im thinking PFC.. but Im not sure if ill go HKS GTRS or something like a GT30?? What do you guys think?? are the GT30's really laggy? I mean in the Stagea do you really notice the extra lag because they are so heavy?

just put a jun stroker kit with a T04Z in it, and do limiter launches.. no lag, hey brad? :w00t:

I will be modifying the stagea... ther only decisions im going to have to make is which turbo and ecu.. Im thinking PFC.. but Im not sure if ill go HKS GTRS or something like a GT30?? What do you guys think?? are the GT30's really laggy? I mean in the Stagea do you really notice the extra lag because they are so heavy?

I have a GT30 in my stagea, along with other mods (see my sig). Last tune was 160awkw at just 9psi. I've since changed the boost controller over to a turbotech (recommended by many on these forums, including me) and noticed much improved response and it holds boost better - probably running somewhere around 9-10psi still.

The GT30 is laggy compared to stock. It'll boost up about 500-800rpm later in the revs than when it was stock.

It depends on how you define lag too. For overall speedy response any time any situation you cant beat the stock turbo.

However if I plant my foot at any intersection, even without revving it beforehand, it will be happily revving over 4000rpm by the time I reach the other side of the intersection. I had my boost controller set to 12psi previously and it would hit this figure between 3600 and 4000rpm. I think when it was stock it would hit 6psi by 3000rpm or maybe a bit less, so when you put it all in perspective its not too bad.

On the plus side, the GT30 goes a LOT harder than the stock turbo and pulls all the way to the redline.

My car is auto so with a manual and pfc or at least some kind of ignition timing control you could reduce the lag even further.

And like webng said, the fact that it wont be building much boost (if any) below 2400rpm means you will save on fuel. It certainly wont be enough to pay off the turbo but it will make you feel better every time you visit the servo :P

I do find myself wanting less lag at times but on the whole the gt30 was a good choice. I'd maybe try a GCG high-flow if I was to do it again. hope this helps.

we have a GT-RS on our car and it is a nice bit of kit. slightly more power everywhere than a GCG hi-flow (but it is slightly more expensive). if money is no object the HKS 2835ProS would be pretty nice with a tiny response penalty but higher flow available on both sides of the turbo (ie more efficient).

i wouldn't want anything much larger on a street stagea due to the extra weight you need to lug around.

a GT30 specced correctly (or the more exxy but similar HKS 3037 ProS) with 260 deg tomei poncams to bring the boost threshold down would be ok but there is a little bit more work and time fitting a GT30.

think carefully, as it is an expensive exercise buying one that doesn't suit what you want, however, don't try and do it on the cheap.

...and don't get suckered into bigger is better cos it just aint so.

Yeah im thinking GTRS at the moment. I had an R33 in the past with a HKS 2535 running 244rwkw and it was amazing how responsive and punchy the car was... there was stuff all lag and it just pulled!!!

If it were another skyline then i would go GTRS, the only reason i am thinking about the larger turbo is because I dont know if i am going to be happy with the 250 - 260 rwkw the GTRS will produce in a heavier car.. I'm happy to spend the right money on the right setup but i just dont want to spend the money and take the GTRS to its capacity then realise I want more...

Does anyone have any 1/4 mile times with different turbos and dyno graphs?? terminal speeds etc???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...