Jump to content
SAU Community

Recommended Posts

hi people, i seriously need some help, i just picked up some work emotions CR KAI for my r32 gtr, they are 18+9.5 all around and the offset is +12 so will they fit on my r32 gtr, please let me know guys and how much are they worth, they come with tyres aswell but please let me know what they are worth and if they will fit, they are in gunmetal grey, cheers tony

Edited by tony_nivin
Link to comment
https://www.sau.com.au/forums/topic/188904-bought-new-wheels-please-help/
Share on other sites

Yes, they will fit, depending on the size of the tyres. The rears will be fine but the fronts may be a bit of a squeeze. Ive got same sized wheels on mine and it fits, but as i said its a squeeze in front.

Probably worth around 2k+ for the wheels alone?

you are kinda correct.

You need to maintain the same rolling diameter (within a few mm). The easiest way to do that is to run the same size tyre front and rear.

He has a 32 gtr as you can't fit that size wheel under a gtst guard without a lot of work

but i heard its no good to run different size tread on the gtr because i wanted to run 245 at the front and 265 or even 275 at the rears, have you got a r32 gtr or a gtst

dont worry about that within reason...when mine was a street car I ran 275/40 rear and 245/45 front and never had a problem

I am running 235s on the front, slightly stretched, but it looks like if i go much wider than 245, i may get some scrubbing problems. Im running 265s on the back no problem.

your rear guards are rolled, aren't they?

or are you running lots of camber?

cheers

nar my rear guards arent roller or anything, i am running 255 all round now and the car is perfect but the wheels are 17s, so i bought 18s and the tyres that im gona get are 245 all around so i think that should be orite, thanks alot guys, cheers tony

I cant comment on handling as the 18x9.5 rims are only my street rims. The tyres came with the wheels when i bought 'em so im just using them until they wear out. In saying that, I have seen several other people using the same combination of tyres on circuit 32gtr's (235/40/18, 265/35/18) so they can't have that adverse an effect on handling, since they have similar rolling diameters anyway. I use 235/45/17 RE55s for the track on 17x8.5" rims.

Ronin_09, my rears aren't rolled, and no massive camber, just some slight natural camber from lowering the car. Why do you ask? Have you had some problems with 265/35/18 tyres on a similiar sized rim?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
    • Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
    • It's more like on average the things I see a lot of things going wrong. Yes, usually the people who reach out are the ones who are having problems but on average it feels like mechanics and tuners here aren't really competent. I swing between thinking my standards are just way too high and wondering whether people really are just this dumb. I just had the strangest 10+ reply argument on a Facebook group over someone insisting that the factory R34 GTT boost control solenoid reduces boost pressure to 5 psi when it's on and raises boost pressure to 7 psi when it's off despite showing the exact plumbing in the factory service manual and the solenoid behavior detailed in the FSM.
×
×
  • Create New...