R33 Lca Into R32

[Simon-S14]

I wouldnt mind increasing my front track some more and getting a little more camber, Has anyone had any luck with putting R33 lower control arms into an R32 at all for track use?

Cheers

[BHDave]

i did s14 as it's rather hard to find a pair of r33 ones. the front left is always bent for some odd reason....lots of right ones available though

I installed roll center adjusters and found that i lost width at the base of the hub, so effectively lost track and camber. The s14 arms were needed to get it back.

[1400r]

Ive got some jic fixed camber arms you can have for $100 Simon

had 5 degree neg when I fitted them up lol

ps I also fitted r32 lca to my sil80 back in the day gave it mass camber without coils probably atleast 2.5 degrees maybe more

Edited October 12, 2007 by 1400r

[Simon-S14]

what are the camber arms ryan? the upper control arms?

I reckon i'll just run a set of s14/33 lca's lol

[1400r]

yep front upper JIC fixed non adjustable arms

[Simon-S14]

so are they shorter then stock or something??

[1400r]

yeh a fair bit I had two sets and sold the other pair to Brenton

they gave him dead on 2.5 deg neg I thought mine were going to be around 3.5