Jump to content
SAU Community

Wolf Ecu's And Boost Solenoid


SkyDragon
 Share

Recommended Posts

I am considering a Wolf V500 for my R33 SII GTST. First of all any comments on experiences with these would be great (i keep hearing mixed stories)?? Secondly, how reliable is the boost control unit? Most ECU's with in-built boost control dont particularly have the most reliable solenoid making boost and hp float around a bit, especially during tuning. Some comments please...

Link to comment
Share on other sites

may be a silly question...but the wolf has a solenoid buit in? Or can the unit only control a solenoid? Its is a pretty small unit and one wonders how it can fit

Im actually not sure, thats one of the reasons i was asking?

Link to comment
Share on other sites

yeh coz im geting the wolf aswell. I already got a avcr so may sell it and put the money towards the wolf. If you look at the actual unit you can see a hose connection sticking out. May be a vaccum hose for a built in solenoid??? Then again i may be a complete nob....

Link to comment
Share on other sites

So your going to use a V500 on a 34GTT?? Be interested to hear how it pans out.

Yeah im unsure about the solenoid, I do not really have a pic handy to see the hose your talking about, I have just heard that internal solenoids are no good, but no real reasons why?

Link to comment
Share on other sites

The hose sticking out is for the inbuilt MAP sensor in the WOLF.

They do not have inbuilt boost solenoid's AFAIK, they can only control boost using an aftermarket solenoid. Namely I was told with the V4, I could have used a 33 gts-t standard solenoid and wire that in.

Hope that helps

Link to comment
Share on other sites

yeh a workshop here in perth have wired the v500 up to a r34 gtt with good results. So still no need for the avcr really i guess. Any1 know how much after market solenoid go for? Interesting to see how a standard one would perform thou?

Link to comment
Share on other sites

The Mac valve (Blue rectangle with 3 ports) costs $125.00 from Haltech. It works really well when controlled properly.

You know there is a plug in available from Haltech also that does all your boost control, anti-lag, launch control and lets you remove the AFM ?

It might be worth looking at the E11v2 plug in kit before deciding on an ECU

Link to comment
Share on other sites

i am thinking about putting a wolf v500 into my 32 gtr (was going to put one on my old sil80) they come with (pretty sure, might have to buy) a patch loom so you don't have to hard wire it in if you don't want to. plus it has all the anti lag and map sensor jazz.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...