Jump to content
SAU Community

Recommended Posts

Been reading for years that the N1 pump just has a higher rated spring over the standard pump

I just read this

www.gtr.co.uk/forum/upload/39978-n1-oil-punp-upgrade.html+N1+oil+pump&hl=en&ct=clnk&cd=5&gl=us

is this true? Or did this person pick up a Nismo pump rather an N1?

thanks!

Link to comment
https://www.sau.com.au/forums/topic/189044-n1-oil-pump-flow-more-than-factory/
Share on other sites

n1 oil pump pumps around 25% more oil than standard. theyre a high flowing oil pump.

if you're using one on a high revving engine make sure you do the oil feed mod to your block as it can empty your entire sump 25% quicker :cool:

high pressure pumps increase oil pressure throughout the rev range.

you can make any oil pump have a harder spring, just tighten the big bolt on it. all this does is raises or lowers the peak oil pressure.

it works on the same principal a wastegate works on.

  • 2 weeks later...

I was under the impression N1 oil pumps flow "LESS" than factory ones.

they are designed for constant hi revs.

and being that the RB's all have oil control problems, where by too much oil gets pushed to the head, the N1 designed for that sort of situation flows LESS.

Same goes for the N1 water pumps compared to other RB water pumps.

thats true but only for the N1 water pumps. they flow less at low rpm because they were designed mainly for vehicles that are track dedicated or vehicles that are driven hard (sustain high revs, often) and are fed a higher volume of water at higher rpm where they spend most of their time.

N1 oil pumps flow more all over the rev range. they are a 'high volume' pump which means more oil and higher pressures. i've got one in my car and my std gauge reads a little higher than what it used to before the build.

Well the thing is I've always *read* the n1 pump just has a higher rated spring. I've never came across something otherwise until recently. Even sydneykid said so himself

http://www.skylinesaustralia.com/forums/in...t&p=1668325

Higher pressure doesn't substaniated higher volume. You can have higher pressure with the same volume.

Edited by maximajim

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
×
×
  • Create New...