Jump to content
SAU Community

Recommended Posts

Hey im probably going to get a k&n air filter but just wanted to know do you hear any sucking noise compared to a pod filter??

i just got my car imported and it was serviced with a new air filter so i dont know what to do yet but its a recaro brand filter.

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/
Share on other sites

hmmmm thought so :domokun:

i want low-mid torque for launch n that but i want the sucking noise too

A pod filter doesn't really mess with your low-mid torque at all.. That would have more to do with your exhaust,clutch,tyres in most circumstances..

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3410373
Share on other sites

but doesnt k&n give u better response when accelerating and pod filter give you better top end speed or high end torque something like that

It's been said by some members on the forums here that they've noticed a little lack of low torque after putting on a POD.. But I think the gains/differences aren't that noticable.. You're car just breathers cleaner, should run a little more efficiently, get more km's per tank of fuel. I had a boxed POD with cold air intake on it on my old 33 GTS. That seemd to give me the best of both worlds.

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3410397
Share on other sites

yeah if i go with pod im gone need heat shield and good setup so it breaths cold air properly...and im not to good at all this stuff

There's a member on the forums here called Maxx he makes and sells the boxes for R33's anyway it just replaced your stock airobox, encloses the pod, has a clear plastic top so you can see in and still keeps the stock snorkel feed.. See below. If you wanted to get more out of it I'd set up some PVC piping or something from the front bar to blow underneath the pod aswell.. More air can't hurt.

2r24xgj.jpg

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3410446
Share on other sites

i have a yellow paper panel filter on my r34 im not sure what brand it is but it was on it when i got it. anyway above 4000rpm i can hear a sucking noise it sounds pretty cool. and in my old car i had a k and n air filter and it used to make more of a whistling noise, but both weren't really loud but you could hear them without the radio on.

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3410572
Share on other sites

I started with the stock airbox, went to a pod in a cold airbox with cold air feed, and then back to the standard air box with an Apexi panel filter.

When I changed back to the standard air box, I could notice the following:

- less top end pull

- much better lower end torque for day to day driving

- quieter

If you decide to get a pod, definitely get a heat shield and pipe some cold air to it. I'd recommend a dry/paper filter, not an oiled one like K&N. In a test the Apexi filter had the best filtration and flows just as well or better than the others. It is dry so you can just blow it out with an air compressor when it needs cleaning - ie no messy oil kits.

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3419844
Share on other sites

I used to have a Apexi power intake pod but recently noticed it was dirty so i put the stock air box back on again. The car runs the same, if not better (smoother?).

I could only hear the suction noise if the bonnet was open otherwise i really didn't notice much of a suction noise that everyone goes on about. IMO save your $89, spend it on something else :D

btw you might find this useful, it gives a comparison on the different brands: http://www.mkiv.com/techarticles/filters_test/2/

Edited by shaun123
Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3420960
Share on other sites

I used to have a Apexi power intake pod but recently noticed it was dirty so i put the stock air box back on again. The car runs the same, if not better (smoother?).

I could only hear the suction noise if the bonnet was open otherwise i really didn't notice much of a suction noise that everyone goes on about. IMO save your $89, spend it on something else :)

btw you might find this useful, it gives a comparison on the different brands: http://www.mkiv.com/techarticles/filters_test/2/

You should have cleaned your pod!! It makes a massive difference.

I agree that the Apexi pod does not make much sucking noise, but it is louder than the standard box.

hmmm i have my mind made up one minute then change hahhaha

$89 Apexi Pod

or around $100+ for K&N panel filter

i still duno yet :)

im sort of leaning towards k&n Panel filter

I'd go with the panel filter :)

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3421670
Share on other sites

  • 2 weeks later...

I find the K&N panel filters to give better responsiveness. As a daily driver I just find something like this to suit my needs. But if your really out for the the intake sound, go for the pod, but as everyone said, let it at least have some cold air feed.

Just wondering what pod filter to get on my 34 gt

I want a sucking noise

which pod delivers on that... personally i was gonna go blitz but not sure

what you guys think???????

tahhh

Most likely the Blitz and K&N Pod's. I haven't used apex'i but as far as I can see it won't be as noisy as the two brands. Though I've heard that some cheap brand Pods use cheap oil which can make the sensor dirty reducing performance.

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3440003
Share on other sites

just changed from k&n panel to apexi pod. found the pod to be heaps better and fixed the problem of oil slowly getting onto my air flow meter and stuffing up my a/f ratios. if your gunna use a panel use a dry one, not oiled. :O

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3440038
Share on other sites

I find the K&N panel filters to give better responsiveness. As a daily driver I just find something like this to suit my needs. But if your really out for the the intake sound, go for the pod, but as everyone said, let it at least have some cold air feed.

Most likely the Blitz and K&N Pod's. I haven't used apex'i but as far as I can see it won't be as noisy as the two brands. Though I've heard that some cheap brand Pods use cheap oil which can make the sensor dirty reducing performance.

i was thinking that aswell... thatnks for the help mate

cheers bud

Link to comment
https://www.sau.com.au/forums/topic/189214-kn-filter/#findComment-3440050
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...