Gts-4 5 Stud Hub Swap

[Tao]

hi, I just picked up a 1993 gts-4 and I'd like to swap out my hubs for 5 stud. I've done some searching and found out that I need the hubs, brake, and rotors. what I'd like to know is can I use them from a z32. I have a buddy stationed in Okinawa and he is stripping down his z32 before he comes home and I'd like to kow if I should have him put all that in his shipping container.

[kudos.motorsports]

As your vehicle is 4WD you will need R33 GTR front hubs, rotors, calipers and rubber brake line. The rear is a different story, I'm assuming the GTS4 uses an R200 rear? This being the case you will be able to use any R32/33/34/Z32 rear hub, rotors and calliper.

If you have any further questions don't hesitate to ask

[funkymonkey]

you'll need R33 GTR or WGNC34 Stagea front hubs (I'd go with the stagea ones if you're on a budget). For rears you can use R33 GTSt, or Z32 stuff.

[Tao]

thanks guys that's exactly the info I was looking for. how much would be a reasonable price to expect to pay for some r33 front hubs, caliper, rotor, and brakeline?

[adam-__-]

It cost about $1k for everything, front and rear hubs, calipers, rotors etc. So half that number, $500?