R32 Gt-r Clock

[GimpyDammit]

Hey,

The clock on my R32 hasn't worked since I have had the car, except for yesterday when I turned the car off, the clock came on, and when I shut the door, it went off again. ><

I'm thinking its a loose wire, so does anyone know how to access the wiring for the clock? Or have any suggestions?

-Michael-

[godzl1975]

you have to take off the lower shroud off, screws from memory are on the dash and to the upper shroud on the sides, think there is 2 on each side.

[blind_elk]

You'll need to remove the instrument cluster. While it's out, check the small backlight globe in the clock.

[GimpyDammit]

You'll need to remove the instrument cluster. While it's out, check the small backlight globe in the clock.

Heya,

The clock works, just not all the time. Was working while I drove home from physio today, then when I parked at my place it disappeared ><.

Thanks for info, I can see a panel being held in place by 4 screws, thats under the clock, so i'll take the screws out and have a look inside.

-Michael-

[gun32gtr]

mine died 2,dont bother me but

[[WLDCRD]]

a lot of them dont work. my old one used to every now and then but rarely. but then i replaced it and havent had a problem with it since

[Yawn]

Off topic, but changing the backlight globe for the clock wont change the colour of the clock am i right?

Gotta change the gel?

[LoNg_ShaNks]

Off topic, but changing the backlight globe for the clock wont change the colour of the clock am i right?

Gotta change the gel?

ummm it will depending on the colour of the blacklight globe ur replacing it with no brainer really...