Jump to content
SAU Community

280rwkw Setup - N1 Turbos, New Stainless Dump Pipes And Pfc Tune To Suit.

Rowdyr32
 Share

Recommended Posts

Rowdyr32 Mentor

Rowdyr32

Posted
Posted

I just bought some new turbos for more power so these need to go.

There R32 N1 turbos with no leaks.

Brand new stainless dump pipes with seperate wastegate tube plumbed back in. To suit 33gtr but can I can supply them to suit 32. The exhaust gas sensor is a different thread thats all.

Also a really good pfc tune to suit this setup.

I was running stock afms, injectors etc and they have made 292.5rwkw but I had the pfc retuned to a safer more through tune using the injectors and timing maps not just tuning off the afms and it now makes 280rwkw and has seen a little track time with no detination.

If you bought this setup all that would be needed would be a little tidy up of the tune to suit your car. Maybe 1 hours dyno time instead of a full remap. Save big $.

I'm after $1000 for the lot which is cheap considering if your ceramic turbo shits itself an engine rebuild is 5g plus and you also get more power. They are still in the car atm.

Phone if your really interested

Gareth 0417370869

Melbourne

Rowdyr32 Mentor

Rowdyr32

Posted
  • Author
Posted

It rises up to 20psi and it drops off to 18psi up top so max about 1.3bar. We couldn't get the boost controller to hold the boost up there but in a way it reduces the chance of killing an engine at the higher rpms so its not really a problem.

These turbos have really good response on the track and at motocarna's so it gives the car really good traction/drive out of corners compared to a few cars running singles and there also nice on the street.

If your after really cheap power you can't go past this setup. Its kept me more than happy for the last few years.

Rowdyr32 Mentor

Rowdyr32

Posted
  • Author
Posted

I don't know about when they start making boost and full boost but I can tell you that it makes full boost way before a gtr with a to4z due to how it pulls away out of corners and when it was overlapped over a gtr with 2560-5 turbos with around 10rwkw more power the power curves were almost identical apart from the 2560-5's making about 5-10rwkw more once the power graph began to rise.

Hope this answered your question in a round about way. There is no problem with response. Its all about your right foot and how good you are. What are you planning on using the car for? I have used it for track and motocarna and have had performed very well with what I have and have had no problems with lag at any time.

  • 2 weeks later...
Brezza Proficient

Brezza

Posted
Posted
Must go. any offers

hey mate,

i am running a stock R32 GTR, was thinking about upgrading the stock ceramic turbos.

what mods did you have when you got 280rwkw?

i am only looking at replacing the turbos and getting a FMIC and Power FC i dont want to have to change internals.

Rowdyr32 Mentor

Rowdyr32

Posted
  • Author
Posted

Brezza you already have a fmic and its good for over 350rwkw so keep it. Save the cash for an exhaust system and cam gears and the pfc and you have the same mods as my car. Replacing the ceramics is a great idea. I've had a exhaust wheel go through a rb26 and its not cheap to repair in a old car. As for internals there are guys in the club running 350rwkw out of rb26's with stock internals so the N1's will be fine.

Brezza Proficient

Brezza

Posted
Posted

hey mate,

is the N1 just a rebuilt stock turbo with better bearings and steel wheels?

also what boost were you running to get 280kw?

i would be aiming for around 260kw, something a little more safer and something i can use without stopping for fuel all the time

Brez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • dbm7
      Shifting questions

      By dbm7 · Posted

      ...oops. forgot the TCU end...
    • Sleepergm
      Custom titanium intake

      By Sleepergm · Posted

      No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...