Jump to content
SAU Community

Recommended Posts

Hi Guys n Girls, here's some up to date info on redline gear oils...

All-2001 GTS & GTS-T (single turbo) (R32,R33,R34) RB25 & RB25T Eng, 2500cc, 2WD

Component Recommended Oil / Fluid

Manual Gearbox Select your closest climate range. For -10°to25°C use 'MTL' or 5°to35°C use 'MTL' or 15°to50°C use 'Superlight Shock'. (* Advantage option for Performance / Racing use 'Lightweight Shockproof'.) @ see handbook for Litres Rear Diff Red Line '75W90' Gear Oil (* Advantage Option for Racing use Red Line 75W90) @ see handbook for Litres

SERVICING - GEARBOX, DIFF or AUTOMATIC TRANSMISSION: Change your oil at up to 4 times the current changeout period on conventional oil, depending on type, age & usage; else under warranty, change oil as per warranty specifications. Oil life may be extended in addition to this subject to oil analysis readings. (Testing may identify a mechanical or engineering failure, even when the Red Line oil is still in good condition!) Tip: Automatic Transmissions - Make sure a qualified transmission workshop not only changes your oil but gets all the oil out of the torque convertor as this can hold up to 4Ltrs of your contaminated previous brand oil.

http://www.redlineoil.com.au/oil-finder.asp

UPDATE: from redline australia! The web site info is incorrect (American) the shockproof oils are fine for synchrmesh gear boxes... and they will be udating the web site to reflecting this updated info...

"superlight" for hard driving/track use.

"lightweight" for normal street/track use.

"heavyweight" for normal street use.

Hopefully this clears things up!

Link to comment
https://www.sau.com.au/forums/topic/190062-redline-gear-oil/
Share on other sites

  • 4 months later...
I wouldn't use Nulon, even as weed killer.

hhehehe realy :rofl: ,, thats cool, id didnt use it either, just changed to MT90 oil yesterday, so far so good............hopefuly this oil will look after the gear box for longer period.

If you use a cheapie oil then the Nulon might be worthwhile, but with the good stuff like Redline they will have already put all the additives in so there's no need. You might actually go a bit backwards as you will upset Redline's balance of the additive concentrations. That's the theory at least. Ring them if you want first hand info.

ive got nulon N70 in my box.. the box couldnt be smoother or slicker. u obviously have never tried N70 b4 :( Teflon is the slippierst compound known to man :\

Sorry, forgot to mention that I was using N70 with Pnzoil gear oil before.....and then this crunching problem appeared, after redline MT90, its all gone now....without N70 hehehe :blink:

i use redline.. and while they use awesome additives.. they dont use teflon. nothing comes close to teflons friction removing properties hahahah nothing at all.

Really? Then why do DuPont claim "Teflon is not useful as an ingredient in oil additives or oils used for internal combustion engines."?

i use redline.. and while they use awesome additives.. they dont use teflon. nothing comes close to teflons friction removing properties hahahah nothing at all.
Really? Then why do DuPont claim "Teflon is not useful as an ingredient in oil additives or oils used for internal combustion engines."?

This is interesting....

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...