Jump to content
SAU Community

Recommended Posts

no need to say too much --------------->> RACEPACE +1

saw ur car at Racingline b4

how come u dont get nigel to tune the car for u???

I've retracted my post due to a particular user not appreciating my comments. If you'd like to know why I would not take my car to this tuner feel free to PM me.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

i would also agree with phil & Trent for CREATD Motorsports

They modified a rb26 PFC to run in my rb20 and no dramas at all

great guys and great prices to

kthnx

What the!?!?! Modified RB26DETT pfc for your RB20DET?? How was that done? Was it complicated? How's it running now?

Have to say Ray at RE Customs, anytime for Power FC.

I have seen many cars from other "reputable" workshops with PFC and must say they either didn't have a smooth fuel or power curve and some even ran quite lean.

If you want an excellent job and not get ripped off. RE is the only place in my opinion. :nyaanyaa:

Have to say Ray at RE Customs, anytime for Power FC.

I have seen many cars from other "reputable" workshops with PFC and must say they either didn't have a smooth fuel or power curve and some even ran quite lean.

If you want an excellent job and not get ripped off. RE is the only place in my opinion. :spank:

Who would be dumb enough to tune gtrs LEAN :) ?

Haha ^

Yeah, Racepace, RE, Creatd and Chasers are all workshops worth considering with reputable tuners.

From experience Racepace is rather pricey, but he does really know his stuff.

Edited by Yawn
I've retracted my post due to a particular user not appreciating my comments. If you'd like to know why I would not take my car to this tuner feel free to PM me.

Which tuners lol?

A long time ago i posted something in the member's section and i got a call from THIS TUNER, must be the same tuner lol. Still give me a good laugh everytime i think about it, one sad tuner.

Electronic Automotive

03 9408-8122

15 Salicki Ave, Epping

they do tonnes of top notch cars, have been around for like 20yrs, had the donught king drift S15 in there today, they do heaps a race cars, did the rally WRX we had at work, i wouldnt take my car anywhere else, there australias king of Fuel injection....

Go Chasers.

Paul tunes rally cars in China. People from overseas pay him to fly down to their country to do tuning.

Chasers Motorworks

4/440 Dynon Rd, West Melbourne

9687 7118

I vote for Chasers. Paul really knows his GTRs...

+ 1 for paul @ chasers

The man definitely knows how to tune ANYTHING

they brought in helicopter with a subie engine and a motec m4 for him to tune the other day - he also gets flown all over asia to tune rally cars and even does motorbikes from time to time.

Chasers, Racepace, CREATD are definitley well known in the vic import scene - you can't go wrong with any of them

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
    • I actually have an aftermarket hanger, the detschwerks x1 hanger, but my dw420 has never really sat in it correctly, good to know I can just modify it a bit to suit. Yeah cheers man will definitely have a play with it and hope it solves my dramas.
    • Seriously though, it's the Shaft Autoservice high mount rear spoiler: https://az-style.shop/items/5ffaad5a72eb464137a6edb1
×
×
  • Create New...