Jump to content
SAU Community

Omg. Finialy Got My Car Running, Pics Soon

ragex

By ragex,
in Engines & Forced Induction

 Share

Recommended Posts

ragex Collaborator

ragex

Posted
Posted (edited)

omg after alot of mucking around i got my car running smooth, still yet to take it to a tunner, not sure why but it is running really smooth with 55 odd psi fuel pressure, maybe something to do with the chiped ECU that came with the motor,

anyway hit roughly 60km/h boost hit and was going sideways :cheers: to a small degree but enough to make a grin on my dial, BTW this is my First RB & to second that vl & to spesify rb25det in a vl :P

Edited by ragex
ragex Collaborator

ragex

Posted
  • Author
Posted

yah i know its not ecu controlled, when i ran it at 38 it splutters and stuff, all in all its not tuned, and right now its the stock VL turbo fuel pump, i have an 044 sitting ready to go in. does any of this make sense for the 55psi fuel pressure?

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Sounds like a stuffed pump if your having to up pressure to get any flow from it.

I wouldnt risk it that way either as its on its last legs... i wouldnt even drive it till you get a decent pump in there

-_-StRyDeR-_- Experienced

-_-StRyDeR-_-

Posted
Posted

yeh 55 is way to high lol. i have to buy a adaptor to get rid of my standard reg to instal my adjustable fuel reg, and il be setting it to about 38-40. just so i can drive to tuners...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Neostead2000
      Water leaking into the rear trunk

      By Neostead2000 · Posted

      Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • Ozdavroz
      Lifted R32? Jay (LowStandards) has you covered.

      By Ozdavroz · Posted

      I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • GTSBoy
      WTB-R32 gtst front bar-sydney

      By GTSBoy · Posted

      Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...