R32 Not Starting

[r32b]

Hey all, I had my r32 in storage for the last 6-7 months, and when i tried to start it today, it wouldnt start

all the electrics work fine, ive tried,

-new petrol

-new battery

-just keeps turning over

could it be the ecu?!~

thanks!!!

[adam-__-]

Fuel pump dead maybe?

[r32b]

i turned the car to ignition only, and the fuel pump seems to turn on (can hear it)...

how do i check if fuel is actually making it to the motor,

ecu?! how do i reset the ecu,

or do a test on it, see if it hasn't died?!

what things usually go wrong when a car is left idle for so long?

[dmr]

to reset the ecu, disconnect the battery and press the brake pedal a couple times to drain out resistance.

[r32b]

hrm then since the battery was dead... i assume the ecu would have already reset itself?

any other ideas? need to start then car =[

[dmr]

what about push start?

[r32b]

thanks for all the help dmr,

i don't think that the cylinders are getting any spark, so im assuming its the ecu?!

how do properly push start a car?

[Drift Much?]

he means clutch start ..

Put your car on a hill or push it down the driveway..facing forward

turn car on to the red warning lights.. one before the crank turb

Put your car in 2nd Gear... clutch in....

wait for the car to get enough speed... then realise the clutch..

it should turn on

[barnoon]

Hey mate, read through this thread I made about a month back I fried my computer but a lot of people gave me plenty of suggestions on why my car wouldnt start, might help you out, good luck

http://www.skylinesaustralia.com/forums/t185746.html

[QWK32]

could be anything from the air flow meter, to the CAS, to the igniter pack, coils, or spark plugs. if your saying that your fuel pump is priming up then the ecu may be ok. have you had the car running before it went into storage? checked all fuses? the ones in the car and in the engine bay. there are also two green relays behind where the ecu is located, if they aren't switching you wont get power to your injectors and coils.

[blind_elk]

The "pump priming" could also be the HICAS setting itself up.

[QWK32]

The "pump priming" could also be the HICAS setting itself up.

not on a 32. gotta have the engine going to turn the pump so the hydrolics can move.