Jump to content
SAU Community

R32 Gtr


wolverine81
 Share

Recommended Posts

18" brakes? get the tape measure out, you need to run std size wheels in Targa. Don't think 16" wheels would fit. :-)

:D i wasn't going to say anything about the brakes or the fact that the suspension set up would be illegal as well (unless its just the TEIN set up)

Either way a built GTR is always nice to see on the road, sounds like there not taking any chances with a new motor/box :/

32 GTR price $12000 - $200 000+

Its not the JIGSAW racing 32 is it Skip???

Link to comment
Share on other sites

I thought jigsaw racing's was a R33? Targa will only let you have adjustible dampers, averything elce must be stock (even hicas :/ ). And this year you were allowed to run option sized wheels (18x9 on R32, and 18x10 R33) but that rule might be getting reversed.

Is it matt's blue R32?

Link to comment
Share on other sites

I thought jigsaw racing's was a R33? Targa will only let you have adjustible dampers, averything elce must be stock (even hicas :D ). And this year you were allowed to run option sized wheels (18x9 on R32, and 18x10 R33) but that rule might be getting reversed.

Is it matt's blue R32?

The V-spec GTR is 33 but there is also a 32 GTR getting around with the JIGSAW Racing sticker.

Rickard's was running a single set up or has he changed again???

I doubt he would take it to a local servo anyhow unless it was to get a wheel alignment or something along those lines.

Hopefully Benno can post up about the wheels and ruling for TT08...

Im still trying to picture 18" brakes and the wheels you would need to clear them :/

Link to comment
Share on other sites

If the work shop is in kingston, its Matts Blue GTR and all they are doing is just putting the engine in its really a RacePace built car!

Ah that makes sense then, will be good to see it back in action again as its been off the road for a while (longer than mine :spank: )

Did he stick with the single or go back to twin set up again Ray???

Link to comment
Share on other sites

Nar staying with the twins targa spec, as Matt is taking it in next years Targa. The motor was built buy Racepace and will be tuned by Racepace and the Brakes are 365mm rotors with 8 pot mono bloc AP Racing calipers!

Link to comment
Share on other sites

I've herd that your work shop has all so played with some very nice porches in the past. And are you guys only fitting the brakes or making the adapters as well, as I'm looking for some one to fit and make brake adapters for my car as well :spank:

Link to comment
Share on other sites

  • 1 month later...
Optional wheels sizes will be OK for TT08.

R33 can contuine with 18x10, R32 17x9 or 18x9.

Yeah you can run them but you can bet onyone who does is either slow or has illegal diffs.

(Not that anyonew seems to check!)

An R33 with tarmac rally legal engine gearbox is etc is not goiung to pull 18 x 10s.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Welcome Leigh. While it's possible someone knows something about your car, there are so many in the country, it's likely they won't. Either way, I hope you enjoy it and find the knowledge you seek here.
    • Welcome!  Pics of GU and 370z? It's amazing how side tracked we can get with life.
    • G'day. More deets on your patrol? Unless, it's in a d22?
    • So next year I am looking at upgrading from my VE SS bomadore ute to something more refined.  I wanted to stick with a V8 but not anything German or Australian, either a coupe or a sedan. So if I wanted anything newish that limited my options to either the Lexus RCF which I quite like. But with the price they demand and a kid on the way a 2 door coupe is probably not going to be the best idea. The next best thing would be the ISF but the newest models are 2014 and commanding over 60k and even the older 2008 models in ok condition starting around 35k is kind of bullshit. So I figured if I could not have the noise I could perhaps make do with easy power. Enter the infinity Q50 or Skyline equivalent. The price difference between the 300 and 400hp models seems a bit crazy. Right now there is 300hp Q50 one on carsales from a dealer with 61km for 27k drive away. If I wanted to get a 400hp Red or 400R car the prices seem to start at 43k From my limited research it seems that the only differences are that the 400r/Red Red runs more boost and a more aggressive tune. There are are turbine speed sensors on the turbos. Has 2 pumps for the water to air intercooler. Runs an engine oil cooler. I'm guessing that the exterior trims might look a little more sporty as well. I had a lazy look for upgrades to bridge the gap on z1motorsports They have kits that upgrade the water to air heat exchanger as well as the coolant pump which should give a non Red/400r better intercooling temps than the stock Red/400r. I added an engine oil cooler with a thermostat as well to try and make things as close as possible. Obviously the ECU is going to need a tickle. Having not done much in the way of research they also sell a ECU flashing tool with pre loaded tunes that are supposed to boost the non Red/400R by 100hp which adds 1k USD to the cost. The total cost of the parts @ the current time including shipping and taxes worked out to be $4350 AUD. Personally I would rather get the car tuned on a dyno which would probably add more cost Assuming the worst that you got a workshop to install the new parts I would guess no more than 5 hours would be required in the worst case @ 5 x $150 per hour = $750 So the total cost could be around $5100 So for easy number 5k + 27K = 32k I guess that would leave some change left over to swap out the open diff and fit a LSD Any thoughts?      
    • Right, not sure why I thought it to be a lean spike. It might be fixable with modern card-style hot film MAFs which have some design features to avoid counting reversion flow but I've never tried it myself.
×
×
  • Create New...