Jump to content
SAU Community

R32 Gtr


wolverine81
 Share

Recommended Posts

18" brakes? get the tape measure out, you need to run std size wheels in Targa. Don't think 16" wheels would fit. :-)

:D i wasn't going to say anything about the brakes or the fact that the suspension set up would be illegal as well (unless its just the TEIN set up)

Either way a built GTR is always nice to see on the road, sounds like there not taking any chances with a new motor/box :/

32 GTR price $12000 - $200 000+

Its not the JIGSAW racing 32 is it Skip???

Link to comment
Share on other sites

I thought jigsaw racing's was a R33? Targa will only let you have adjustible dampers, averything elce must be stock (even hicas :/ ). And this year you were allowed to run option sized wheels (18x9 on R32, and 18x10 R33) but that rule might be getting reversed.

Is it matt's blue R32?

Link to comment
Share on other sites

I thought jigsaw racing's was a R33? Targa will only let you have adjustible dampers, averything elce must be stock (even hicas :D ). And this year you were allowed to run option sized wheels (18x9 on R32, and 18x10 R33) but that rule might be getting reversed.

Is it matt's blue R32?

The V-spec GTR is 33 but there is also a 32 GTR getting around with the JIGSAW Racing sticker.

Rickard's was running a single set up or has he changed again???

I doubt he would take it to a local servo anyhow unless it was to get a wheel alignment or something along those lines.

Hopefully Benno can post up about the wheels and ruling for TT08...

Im still trying to picture 18" brakes and the wheels you would need to clear them :/

Link to comment
Share on other sites

If the work shop is in kingston, its Matts Blue GTR and all they are doing is just putting the engine in its really a RacePace built car!

Ah that makes sense then, will be good to see it back in action again as its been off the road for a while (longer than mine :spank: )

Did he stick with the single or go back to twin set up again Ray???

Link to comment
Share on other sites

Nar staying with the twins targa spec, as Matt is taking it in next years Targa. The motor was built buy Racepace and will be tuned by Racepace and the Brakes are 365mm rotors with 8 pot mono bloc AP Racing calipers!

Link to comment
Share on other sites

I've herd that your work shop has all so played with some very nice porches in the past. And are you guys only fitting the brakes or making the adapters as well, as I'm looking for some one to fit and make brake adapters for my car as well :spank:

Link to comment
Share on other sites

  • 1 month later...
Optional wheels sizes will be OK for TT08.

R33 can contuine with 18x10, R32 17x9 or 18x9.

Yeah you can run them but you can bet onyone who does is either slow or has illegal diffs.

(Not that anyonew seems to check!)

An R33 with tarmac rally legal engine gearbox is etc is not goiung to pull 18 x 10s.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Yeah I would like to try and get a ADM car to reduce issues with insurance. I've decided if I end up getting this car I will set it up to be a sleeper build, leave it looking stock/dad spec on the outside I wonder if you can just drop in the 400r/Red/Z ECU or better still use a flashing tool to copy the map off one. Backup the factory map and then flash the 400hp cars onto the 300hp cars ECU?
    • Nah, yeah, nah. Speakers have a nominal impedance of 8 ohm that looks more like 6.4 ohm when measured. The receiver's amplifiers (all channels) are all rated to 6 ohm (I think, it's been a long time since I cared). The real problem is that many modern class D amps have aggressive protection circuitry that cuts off the fun if they think too much current is being drawn. And with my speakers having series crossovers, as opposed to more typical parallel crossovers, and big TL enclosures, they can certainly dip down to lower impedances at some frequencies and that easily triggers the protection. Pioneer receivers are somewhat famous for it, but even Denon, Onkyo, et al, all have many complaints against them across various models. It only does it when listening to music at high levels. You have to be putting your ears at risk to do it. But sometimes I want to do that. If I was serious about using it as a listening room I'd simply upgrade the amp for the front pair to a nice Rotel or something, and just use the receiver for signal handling and processing - although that would be a bit of a pain in the arse too. Have to switch on more shit, pre-amp volume vs main amp volume, etc etc.
    • yeah pretty much, stopped playing after lightfall, couldnt be bothered with the final shape...  ran that game into the ground for years... bit of a shame.. the  story was awesome. was playing a lot of trials but the hackers became tooo much, ruined the game.  
    • This is why you don't get invited to press events.         Kodi
    • For example, you’ll need this approval if: you’re a car enthusiast looking to import a specialist vehicle or an older car you want to bring your vehicle with you when you move to Australia you manufacture or import special purpose vehicles or a small number of trailers each year.       Tutuapp 9Apps
×
×
  • Create New...