Jump to content
SAU Community

Recommended Posts

Hey guys. After selling my 32 GTST about a year ago, i'm thinking of getting a 32 GTR... in WHITE :)

While i have been looking at some for sale here, i'm seeing some people have rebuilt motors, bearings have gone and all sorts of stuff with the engine. Is it common to f**k up a motor in a GTR or what? I don't want to buy a car and have to spend rebuild motors for $13+ grand that some people are paying. I just want a GTR - exhaust, rims, cooler, filters... but nothing major except maybe a little boost.

Any suggestions on what to look for because i really don't want to spend money on it apart from those minor mods, especially on repairs as i'm not exactly making a lot of money these days...

Link to comment
https://www.sau.com.au/forums/topic/190975-getting-a-32-gtr/
Share on other sites

They're old cars which have been thrashed so it's not surprising to see heaps of GTR's with engine rebuilds. If you're worried about purchasing a GTR and having to rebuild later on down the track (about 2 months later), buy one with an engine rebuild already done. The owners would've kept all the receipts so you can check what's been done to it etc.

Good luck with the purchase anyway mate. White is one of the sexiest colours for the 32 GTR. Get either white or silver in my opinion.

They're old cars which have been thrashed so it's not surprising to see heaps of GTR's with engine rebuilds. If you're worried about purchasing a GTR and having to rebuild later on down the track (about 2 months later), buy one with an engine rebuild already done. The owners would've kept all the receipts so you can check what's been done to it etc.

Good luck with the purchase anyway mate. White is one of the sexiest colours for the 32 GTR. Get either white or silver in my opinion.

Thanx man. The thing is, i was always under the impression that most GTR's were owned by enthusiasts, and not some 18 year old sick c**t that puts in a RWD/4WD switch and drives it around like a dickhead. Thats what i was hoping for at least. Do you think a rebuild comes every year or 2 or what? Just to give me a rough idea, anything helps thanks man!

You shouldn't have to rebuild your engine every two years if you take care of it (as far as I know).

There will always be a GTR owner who's 18 and drives around in it like a dickhead. You won't be able to avoid that. The only thing you can do I guess is check out the car thoroughly and decide whether or not the car is worth what the owner is asking.

Buy one already in the country as you get to inspect it. There are plenty around, be patient.

Engines are RB's and they can go for a long time if they are taken care of. I dont see why a gtr engine thats taken care of cant get 300'000 without a problem. I get the impression that servicing in japan is very expensive and most of them probably wouldnt get the care they deserved/oil changes and with freqeunt hard driving yes they do wear out. Most engine failures are due to insufficient oil getting around the engine on the track or the stock ceramic turbos being driven too hard and smashing apart taking the engine with it. I think this is way more common than just wearing out.

Do not buy one without a Compression and a leak down test on the engine as you might be buying a dud from the start. ESSENTIAL.

Aftermarket turbos are definently a good thing to look for. The stock ceramic turbos dont like to be overboosted and are wearing out by this time anyway. This could save you an engine

Look for one Without those mushroom style HKS foam filters. A filter that you can see light through isnt stopping dirt getting into your engine. A set of Apexi power intakes or even the stock air box are the best at filtering. So 15 years of inadequate filtering getting dirt into the engine isnt the best.

A lot of R32 gtr's have rust. You would be lucky to find one that didnt so do some searching on here to find out the common rust areas so you can inspect properly before buying.

Ignore the KM's on the car as its rarely true. If you get service history and the kms match up then great otherwise look for wear on the seats/steering wheel/handbrake to get an idea of how often/hard it was driven.

Things like powerFC/aftermarket turbos/upgraded fuel pump/splitfire coil packs/injectors/N1 oil and water pumps/timing belts are all mods that are worthy of paying a bit more for. Sure it means that the cars probably been driven a bit harder but these are all things that i believe should be done anways on a 15+ year old car as maintenance as the original parts are getting on.

Check CV boots for splits. common and CV's and the boots may need replacing.

dont bother upgrading the intercooler unless you want to get really serious with it. The stock one flows good.

Aftermarket oil pressure and boost guages will be needed. stock ones suck.

Check brake rotors for scoring. Brembo brakes came on the later 32 GTR's. Do a hard brake and make sure the ABS is working properly.

ITs gonna cost you buddy! Hope you are prepared to take on the responsibility of fixing things often or set aside enough money to buy the car and then the do ALL the maintenance it needs straight away if its not already done. So talking about spending 5k on top of the purchase price for replacing old parts then you will have a great reliable car. Thats what i would do if i went through this again..

saying all this. they are a fantastic wonderful piece of kit :)

Edited by hazerb30

Not just 18 yo drivers can have a trash in a GTR. A lot of GTR's are brought to the track for some fun.

An 18 yr old car that was built to be trashed and has been trashed is likely to need an engine rebuild sooner or later. If you just plan on raising the boost a bit and keep things fairly standard, theres nothing stopping that stock engine from lasting you another few years as long as it was healthy to begin with and you service it regularly.

That said, if I was to buy a 32gtr again, I would look for one with a fresh rebuild by a reputable workshop, just to be safe.

Thats a lot of helpful info you guys just gave, thanks.

Well i'm only 23 myself, and i pretty much want one as stock as i can get one, but in good condition. I don't want to spend any money on it except for minor things. Just buy it, get rims, exhaust and services. I don't want an absolute machine, but you guys got me thinking twice about it now lol. Whats a rebuild worth anyways?

Hmm. 6 to 10 k depending on what you get done on the rebuild. You really want to avoid it so get the checks on the engine done or buy a rebuilt one (and still get the checks done!)

Thing is.. if you rebuild an engine you will want to use it. So that means ECU/injectors/fuel pump/coil packs/oil pump/water pump/turbos anyway. might as well do these things straight up and possibly save an engine failure in the first place.

if you take it out on the track, overfil the oil by a litre (i think it was a litre). Do a search in here about this.

I don't mean to sound like one of those tightasses that does everything the cheapo way, but if i were to get a rebuild it would be as basic as you could get. No forgies and all that stuff. I'm an apprentice so that 8k rebuild would be my yearly salary :laughing-smiley-014:

Thats why i want to buy one that is clean and good (stock), and i don't want to spend money on it. I just want it stock and a good running motor and i will probably only be driving it on friday/saturday/sunday's!

Edited by stawka

If you can do some of the work yourself like engine in/out and disassembling and reassembling the engine you will save yourself 2k+ off that price.

No forgies = save 1k

Id say the simplest most basic of rebuilds would cost around $3k which is mainly machining, seals, gaskets, etc. if you do all the work yourself.

With that said however, it is still money that could be spent elsewhere and which is why hazerb30 and myself are advising you to get a car with a rebuild already done or get a good condition healthy one and keep it stock, with regular servicing.

Both should last you years if you take proper care of it.

Edited by Yawn

Well my brother in law's brother is a mobile mechanic in Sydney (who is REALLY good with turbo's and performance cars - he has 2 Hiace Turbo vans, one is a 2.7litre BULLET). When i had my 32 GTST he used to come down here and do all my mechanical work. I f*kt my motor in it, and he sourced me a new one for 500 and fitted it himself, then he serviced it. Pretty much costed me $500 but i know with a GTR things would cost a lot more.

I'll be looking around for one thats been rebuilt not too long ago, but i cant spend more then 20 - and even thats pushing it because of my shit wages. If i find one for around 18 in good condition with a fairly new motor i'll be loving life. I guess i cant be picking and choosing too much because i'm on a tight budget, but hopefully one comes my way at the right time.

Edited by stawka

I paid the extra for mine and imported an immaculate, 100% dead stock, one owner car with very low km's.

Thing is that didnt stop the front turbo coming to bits before i even registered it! Like they have said they are getting old now. However, the engine was still very strong with awesome compression. They are tougher than most people give them credit for. One blows cuz some guy threashed it with not enough oil or bad tune and then everyone thinks they are all about to go. Get a well maintained car and you will have little trouble. The problem is the less you pay the less you get. Good luck with it.

Deren

id say with your wages, the best thing to do is to wait.

Youll get depressed if youre spending every cent on the car, then youll have no life and no car to drive when it is broken. Wonder why you see so many shitters with popped motors up for sale all the time?

Ive just spent 2k on servicing and a tune just to keep the car running like new....i can afford to....can you?

Buy one when youre on some decent money, when you have some disposable income for the 'fun' things in life.

Mate as everyone else said they can cost a LOT of money to fix even if you fix it

your self.I looked for months and must of looked at 40 plus cars and man it is hard

to find a good one I give up in the end and settled on a GTS.You have to remenber

most of the speedos have been wound back and there been thrashed I find this funny

as you see 2000 model cars with the same kms on them.They are good cars if they

are kept in near std spec or the hotted up ones must be put together with care,

there are a lot of shit mechanics out there .But at there age yes a lot of them

need rebuilds you have to remember that they are a high performance car.If

you cant afford the huge repair bills dont buy one.I think that a R33 GTR would

be a better option a little newer and dont cost much more.At the end of the day

you want to drive and enjoy the car not be fixing it or be waiting for your next

pay check so you can fix it.

Yeah after thinking about it over the last few days, i pretty much have no choice but to either save up and buy a great clean one thats been freshly rebuilt for about $30k, or just get an R34GTT. I think the easiest thing is to buy a clean R34 GTT and be happy with the looks/speed of that. Thanks again for your useful help guys - really needed it! :rolleyes:

I would be buying the one with the original engine as opposed to a rebuilt one.My reasons are as follows.Having had engines built in the past believe me very few engine reconditioners ever do a good job.they quote you parts but leave many standard things in there so it will die again in 12 months.Think of it this way...why would somebody pay top dollar for a GTR and then spend 6 grand or so for reco engine and only a few months later sell the car for peanuts....??? it would be a total loss...if they are so cash stricken now they should of sold the car with stuffed engine for cheap at least they wouldnt be that much outta pocket.I am in the slow process of learning to blueprint engines...lots of reading up to do...its really a very sensitive thing an engine wrong tolerances here and there and you got an engine with bad comp and drinks oil. Or reverse case scenario too tight and overheating,bad oil pressure. I would recommend one of those books from some of the auto stores.." guide to engine blueprinting " it really explains it all in details

I will soon be buying an R32 GTR early next year.Having owned a GTS for a few years I can say this.If all you want is a fast skyline then go the tidy R34 every time.But if R32 is the only thing you will settle for ( like me ) then be prepared that every single component may eventually need to be replaced..maybe not straight away but theres no denying the age of the R32 any car will need to be rebuilt at this age...Doesnt matter whether its Porsche or Ferrari

The major problem with GT-R ownership is putting up with GTS-T owners telling you your motor is in imminent need of a rebuild.

Don't believe the hype.

Of the four (count 'em) R32 GT-R's I have owned not one of them needed rebuilding.

The best thing to do is as follows:

Be patient.

Make sure you have sufficient money to buy a nice example, I would suggest $25k is enough. I wouldn't ever recommend anyone borrow money to buy a car. Any car.

If you are buying it in Australia, check it over thoroughly. This includes things such as compression tests etc. A well looked after GT-R will look a million dollars. A manky one can be picked from a great distance.

If you are buying ex Japan get a trusted broker who understands you want a choice example & who wont fob you off with second rate stock on hand.

With regard to track use/abuse. Typically a track day will cause wear to the brakes & the tyres - neither of which you place much emphasis on when buying the car. Beyond that it gives the engine some work, but the time spent on the track during a typical day is fairly limited, so there isn't really much concern. I have found that most GT-R owners who can afford to run track days lavish care on their cars anyway. But most Gt-R owners rarely attend track days.

The thing to keep in mind is that in this day & age you can't thrash a car like a GT-R on the road - you quickly find yourself in a pile of trouble if you do.

Look for a fairly stock or a sensibly modified car. Most will have rims, exhaust, few will have an aftermarket I/C (you don't need one the GT-R OEM cooler is one of the best in the business) & possibly about half will have pod filters (Which you don't need)

With regard to other stuff people have mentioned:

Rust: Relatively uncommon. If it is rusting check for damage - this is most probably the indirect cause.

Gauges - the stock ones are fine but the oil pressure sender unit frequently fails. Not a gauge problem.

Kms - look at the car. Buy it on condition not on kms.

Brakes - Unless the rotors have been replaced most will be down on thickness. Be prepared to replace them. Brembos only came on V-Spec edition R32's, so forget about them.

Turbo's - stock units have problems when asked to regularly push out 1 bar or more. They are a reasonable unit, but not a high performance one. Have a think about what you want from you car. A good car will push out 300rwhp (or more) with stock turbos on 13lb boost. How much power do you want?

Remember that when released this car was over $100,000 in Australia, less in Japan. So someone with a large amount of momey bought it originally. If it has been well looked after it may well be the best car you will ever own. As I said I am onto my fourth.

I wouldnt say rust is uncommon, ive seen quite a few now. Check the sills especially as many look like they have been lifted with a forklift or a hoist badly. The sills get crushed and rust gets in.

Also for there is commonly rust around the front wheel arches where the crap from the tires hits the arch. Also check the rear guards by running your hand around it as its another common one.

The boost guage is in mmhg which is why i didnt like mine. The oil pressure guage is slow to respond and showed something different every day. Yeh probably a sender fault.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi everyone, I've found some free time to write up my "build thread" which is 10% 'build' and 90% fixing problems of a skyline that has endured a lifetime of abuse. I will start with the backstory & get everyone up to speed. Ever since I was just a teenager in high school I have had a spot in my heart for the shape of an R32 rivaled only by the look of an S13, my mates & I all having overly ambitious dreams as one does about having the sickest car in the school carpark. Unfortunately I started my journey of cars down the path of the Silvia and after spending years of putting up with the underwhelming SR20 life I dipped my toes into the 1J Toyota pool for a small moment until my true compass brought me back to that incomplete dream of an R32. At this point the trawl through marketplace, gumtree, carsales etc. starts looking Aus wide for an affordable example in the current economy which was extremely barebones compared to the good old days of sub 10k cars everywhere. Out of the handful of cars in the budget at the time I settled on a 1992 R32 GTS-T that was located in Adelaide. It had caught my eyes as it was similar price to the others on the east coast and had been RB25DET NEO converted and an open door respray in a custom colour based off TH1. It was also a stand out to me because it already had some NSW registration left which saved me the hassle of getting it on the road in my state. As for mods I was told it was pretty stock other than the motor swap, a nistune to run it, and an unknown fuel pump. My first mistake was trusting the seller blindly that the car was in good condition in all aspects and decided to purchase the car unseen other than some walkaround videos & pictures as the flights down there were very expensive at the time. The price of getting it transported to my door from Adelaide from Sydney was surprisingly cheaper than the flights at the time. I was told the few issues it apparently had was only 1 speaker not working, some cracked or missing trims, and it had been rear ended at some point but had been all professionally repaired (this is all foreshadowing at this point). I paid for the car, and then booked the interstate transport. Now at this point save your criticism as I already know how stupid I sound in hindsight, this was a major lapse of judgement and I accept the problems that followed. I spent the next 2 weeks in a crazed excitement knowing I am finally the owner of an R32 & that it was on its way. I started preparing as when negotiating with the seller I opted out of the Lenso wheels as they aren't really my style & I wanted a set of genuine wheels, and the bucket seats in the car as I am 6ft5 and not the skinniest guy so I had my predictions that I wouldn't fit in them anyway. Due to this the car was put on a set of R33 stockies and some average condition R33 seats that he had laying around. While I waited for the car to arrive I went and picked up a pair of R32 seats and some R32 GTR wheels to fit nicely on it once it had arrived. Being the first time I had done anything like this or had a car transported interstate I had no clue how the logistics of it were, I chose my work as the delivery address assuming it would arrive at some point in the middle of the day. You can imagine my surprise when I wake up to a call from the truck at 5:30am telling me his about 20 minutes away. When I tell you that was the fastest drive to work I have ever done, I managed to catch up to the truck before it even got there. Spent the hours before work taking in the car and living my first experience with one, I had never even been inside one so I spent some time getting familiar with the interior before doing the seat swap. Here is my first proper photo of it as the sun rose in the background. I also noticed it had the switch for the electronic front lip which was a pleasant surprised but sadly upon looking it didn't actually have the lip or the motors or even any wiring behind the switch. As I swapped the seats, the extremely questionable history of the car started to show itself starting with some really dodgy seatbelt buckles that had been extended for some reason with horrendous welds. This was followed by me noticing the drivers side front was quite bent up to which the owner then decided to let me know it had been hit in the front at the same time as the rear end. It also had a pretty leaky power steering rack and the pump was screaming for its life. By now I was a little on edge but I had to get to work for the day, I sent the car down to my mechanic to get the fluids changed and a general check over as I started to question what I had got myself into. I packed the GTR wheels into the car to get put on while it was there as I ran out of time which was a struggle because the handle to release the fuel door/boot was non-existent and just had the end of the cable tied to a bolt. It wasn't much of a surprise when I got a call saying that it looked like the fluids hadn't been done in quite some time. Although that didn't come as a shock, it did catch me off guard when I was told he couldn't open the boot which had the wheels in which I just had open not long before. Mission #1 was to squeeze through the back panel and open the boot from the latch while loaded with a set of wheels which to my amazement he pulled off after a bit of a struggle to reveal there was nothing holding the cable mechanism in place where it sits at the fuel cap. After that dilemma was solved the mechanic did an inspection over the car while on the hoist with nothing too interesting being found other than the expected crushed frame rails. It seems to have had some bilstein shocks installed at some point and judging by the AWD sump that has been sealed up I suspect the NEO is out of a stagea. By the time I got the car back and was ready to have my first drive home in it I was still excited but now quite anxious with the car already. First stop was to the servo to get a nice fresh tank of fuel as I had no idea how long it may have been sitting around for before I bought it. It sat quite nicely on the GTR stockies I must say. Now my drive home from work is short only being a 15-20 minute commute so the chances of anything going wrong is quite small right? WRONG. As I go over a speed bump only 100m from home I start to smell the dreaded smell of electrical burning and my lights drop out and shortly after the car dies. I am in extreme panic at this point thinking the car is going to burn down on its first drive before I have even had a chance to insure it. I move to the bonnet as quick as I can and lift it up, and as I go to grab the bonnet prop my brain is in such a frenzy that it takes me a second to realise my hand is being burnt to a crisp. This is where I notice that there is no plastic clip for the bonnet stay and when I have gone over the speed bump it has knocked the stay onto the positive terminal of the battery welding itself there. Levering it off with a nearby stick I sat there for a few minutes making sure nothing was going to burn down while waiting for a mate to come jump start me. My main stress was that I could've absolutely cooked the ECU or any other electrics. I was relieved when the car started fine with jumper leads on it but it would die as soon as the headlights were turned on so I carefully limped it home with no lights and decided it was a tomorrow task. You can see here where the stand sat on the positive terminal. Thankfully with a new battery the car behaved and seemed healthy. It was pretty smooth sailing for a little while getting to enjoy dailying the car. Interior wise it was pretty much as the seller described except for the the lack of working speakers, the digital controls had no power, and the headunit would randomly turn off & on. I installed a quick release I had laying around from an old car to help with getting in & out of the car and a nice momo wheel. I bought some oem side skirts to match the rear pods that were on the car already, who said a skyline can't be a practical parts mover. Test fit looks good! Found a good deal on a GTR wing & boot that I couldn't turn down. At this point the skyline was being too good to me and had to throw the spanner in the works again. First incident was as I was coming off the motorway and heard a bang and an awful grinding noise. As I pull over down a side street to investigate I notice my whole exhaust has basically fallen off and is dragging on the ground. After waiting around to let it cool to the touch I managed to get it back on its hangers. Thinking it was a weird 1-off instance I didn't think much of it until it happened to me again a few days later to which I see this time the middle hanger has snapped in half and the rear hangers have snapped at the welds. I manage to get the car in to a shop to get the hangers welded and while there I notice that my intercooler has broken its brackets and was being held up only by the piping. Quickly got that sorted and got some thicker brackets out of steel plate to support it all. Just when you thought at this point the car might give me a break, I fill the car up on my way home from the fabricators shop and after I pay I walk back to a good portion of my liquid gold on the floor. I just shrug it off at this point in exhaustion and call it a job for another day. The car had other plans for me though as the next morning on my commute to work, I am halfway there when I notice I am struggling to shift gears. I get lucky with a run of no red lights to work and find some time on my lunch break to investigate the problem. The slave wasn't leaking and the master still had fluid so I was left confused until I contorted myself under the dash and noticed the whole pedal moving loosely side to side when pushed in. Upon pulling it out of the car I found it to be multiple snapped spot welds on the clutch pedal bracket and the actual face of the pedal that sits against the firewall had snapped in half. I jerry rigged it with nuts & bolts at the spot welds but I will need to come back to this in the future and replace with one of the strengthened nismo brackets available. I then got to enjoy the car for another 2 months of cruising and dailying it, peep the obnoxious fireballs it would shoot every shift on the dodgy tune that was on there. On a sunday drive in that period of working car, I was on my way home on the motorway when I heard a slapping noise on my front left to which I pulled over to find my indicator had ejected itself from the car. Nothing a bit of tape can fix lol. I then bought some smoked indicators but after I realised I didn't like the look I found some damaged series 1 indicators. I repaired the tabs with some cut up cards and they looked good to me. My next venture was the hunt for some wheels, I test fit my mates Work Equip Spinning that were tiny 15" and I wasn't sold on the small wheel look. I ended up finding a killer deal on some Rays Volk Racing Group C in 17x8.5 & 17x9 that had been rebuilt many years ago and not ran on a car. I am still yet to get these on the car as they require some specific adapters and shank style lug nuts but I think they will look awesome. At this point my 2 months of reliability had ran out and on a cruise with some friends I suddenly lost the ability to shift gears again and thankfully could get it home by taking main roads and not having to stop. This time my master cylinder was bone dry and the culprit was the clutch slave that had decided to let go. It was a quick and fairly easy fix, but in my luck bad things always come in waves. Only a few weeks later I am on my way home from World Time Attack when the car completely shuts off while coasting down a hill, I try crank it while I still have momentum but no luck. Thinking I might have killed the fuel pump from running it low or maybe killed a CAS because the symptoms seemed to line up somewhat, I opt to get the car towed to a workshop to get fixed up on the Monday. When it gets there they get stuck into diagnosis and the CAS wasn't sending a signal to the ECU, and the fuel pump was also dead so it was comical for a small moment there. They replace the dead fuel pump when one of them notices some smoke coming from the passenger kick panel. Boy oh boy this is where it gets very bad and very expensive. I am not sure who wired the car when the NEO swap was done originally but I hope they never attempt auto electrical again as I am lucky that this handywork only managed to short and kill the ecu and engine loom and not do more damage. This is the point where you could say the 'build' started but not by choice. After some deliberation with my bank account I opted for a Haltech Elite 2500, RB terminated loom, and WB1. While I wish I stopped there and did the minimum of get the car running and leave it at that, I slipped into the rabbithole and decided I wanted to make the most of getting a retune and throw some bolt ons at it and see what it would do. I then threw together a bit of a mix n match build of marketplace deals starting with a GCG GTX3076R, a turbosmart FPR6, 980cc injectors, walbro 460, jackspanian ffp, throttle & fuel rail. At this point it was coming along nicely, the shop was making quick work of it and the bay was looking a lot nicer without the stock crossover intake. I also got them to replace the noisy centre bearing while it was off the road. Then we couldn't get an OEM CAS to talk to the haltech so ended up getting a PRP Street Trigger Kit for it.   While the car wasn't playing nice it decided to kill the stock alternator too so went with an LS1 alternator conversion kit. By now the car was pretty much done and ready to go but come tune day the car kept throwing the timing out every time it would warm up. Upon further investigation it seemed to be warping the PRP trigger bracket when the metal would get hot and expand which would cause the sensor to lose timing as it moves. Herman advised that they have seen the issue a few times now and don't know what the cause is. At this point I decided to switch to the PRP Pro kit with the crank trigger and considering the whole timing belt would have to come off I decided to get a new timing belt kit with water pump fitted. The car would now run fine with no issues and it was finally tune time. It ran up a healthy 275kw but ran out of boost due at 17psi to the rear housing being undersized. At this point the clutch also started slipping and due to it still being a weak RB20 box the tuner set it up to ramp from 8psi up to 17psi with the revs so that it wouldn't load up the clutch and box as hard. Car drives like a dream now. With the car back on the road I could return my focus to the smaller details, starting with getting a set of badges for the hood and quarters. I was struggling to drive with shoes on and I noticed that my accelerator pedal sits higher than my brake and clutch, if someone could confirm how it should sit that would be great. Next little changes was a killallwipers rear windscreen wiper delete, I also got some interior bits I was missing such as parcel shelf speaker covers, wiper trim cover, and boot floor and trims. Finally made it to a SAU NSW event which was awesome to cruise with a bunch of likeminded individuals. Another creature comfort I decided to look into was my lack of A/C. Since the Haltech got wired up the digital climate would power up now, and would blow but no cold air. First issue noticed was the lack of belt on the A/C compressor. After sorting that to no avail, it also had no A/C gas in it, but turns out the condenser has a huge leak. We are almost caught up on the story so far, but at the start of this month while coming into a driveway I heard a huge clunk in the front end to which I got out to witness whatever dodgy camber arms someone installed in this at some point decided to snap in half and I feel very lucky that it didn't happen at speed. Managed to get the car fixed the next day with some replacement GKtech arms. Next problem to address was the leaking gas tank from months ago. Checked the pump hanger seal first but that was fine, stuck my camera up after filling up to try scope out the leak which looked like the breather hose. Got the car up on a hoist prepared to drop the tank when I reached up to feel with my hand and I could feel that the hose clamp was missing and soon after felt that there was a gaping hole in the top of the hose. Replaced and tested and the car holds its liquid now and doesn't give me a fume headache whenever I drive it now. Finally have caught up and now onto fixing my latest issue which is the lack of dash light when driving at night, checked fuses first, then when searching I found the common problem of the headlight switch burning out but mine looks fine. Next test will be plugging a known working headlight switch into my car to tell if my switch is dead. Sorry for the long read but I wanted to be thorough, so if anyone made it this far I salute you soldier. Enjoy the rest of your day and I will keep this updated with issues I find/solve and any cool mods I can do inbetween. Merry Xmas!
    • can someone tell me what information a block number of 330680a on a rb25det engine specifies?
    • Would you suggest staying with a twin setup but upgraded turbos  ?
    • @Duncan hopefully they have a good hard look at Toyota. Both EVs AND performance vehicles! 
×
×
  • Create New...