Jump to content
SAU Community

Recommended Posts

I have recently finished upgradeing my car and think i am ready to get it tuned. mods are as follows:

gt2871 turbo

apexi safc (standard ecu)

fmic

full exhaust

bosch 040

profec b EBC

I am happy to max out my injector duty cycle but need to know before i go and get it tuned will i need some form or fuel cut defender, and how does this work, and where can i get it from?

Also will i need anything else?

comments are welcome

cheers

Link to comment
https://www.sau.com.au/forums/topic/191265-how-much-power-can-i-run/
Share on other sites

i would just get bigger injectors, as they are pretty cheap and don't have to worry about it later on if ya winde up the boost.

i was also happy to max out my stock injectors, but then wouldn't be happy if my injectors failed and blowed my engine up.

have you upgraded the dump pipe?

also would consider upgrading the afm aswell, as that will start to max out around 210rwkw.

Also wouldn't mind knowing what power are you wanting to achieve?

I'd honestly be surprised if you maxed anything out with that turbo. Its not the largest, and i would only upgrade parts once they max out.

You should be right with a S-AFC or similar.

Whilst not ideal for the job, and a full ECU will give much larger benefits... it will be 'ok' to use the AFC device if thats your choice, and the tuner has half an idea

Thanks for the help, im only chacing around 220 to 240kw at the wheels so guess i will see how i go with my current mods, and maybe down the track look at something that can support, bigger injectors, afm ect. seeing as my safc dosnt.

i will post up results after my tune,

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 馃槀 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
  • Create New...