Jump to content
SAU Community

Shoping For A Wideband 02. Need Suggestions!innovative ?

robots

By robots,
in Engines & Forced Induction

 Share

Recommended Posts

robots Experienced

robots

Posted
Posted

Hi!

I'm shopping for a wideband 02 now. I was looking at getting an http://www.innovatemotorsports.com/products/lm1.php, its USD349. Has some simple dataloging functions. And I can also buy a http://www.innovatemotorsports.com/products/lma3.php later, if I will really need it though, for extra USD2XX.

What I've found is that they have a cheaper solution, just a wideband sensor - http://www.innovatemotorsports.com/products/lc1.php. Which is USD200 sharp.

Have any of you used LM1 or other Innovative products ? I want to get some feedback from you guys.

I want to be able to do some road tunning on my car, we got no dynos here :)

Is LM1 really a better value package than LC1 ?

Looking forward to replies!

:(

QWK32 Veteran

QWK32

Posted
Posted

i haven't had any experience with the innovative units, but i can tell you that if its got some datalogging ability it make its so much easier to use. especially an afr to rpm graph. i personally would go for just a wideband sensor and gauge, why not make the whole process easier and get the one with the datalogging. you'll thank yourself when it comes time to tuning. :)

courier33 Enthusiast

courier33

Posted
Posted

I have the LC-1 connected to emanage ultimate for data logging. Works very well and easy to use. I did have the narrow band output running into the standard ecu but I think the updating of it was too fast for the ecu to run closed loop properly. Although, I think theres an option in it to slow the response time down. Cheap option for monitoring A/F ratio. Havent had it on dyno yet so I havent verified the accuracy of it against another A/F meter.

gtst25 Proficient

gtst25

Posted
Posted

If I did it again I'd go for the innovative unit - my dad and I built the 2e0 kit from tech edge and what a mission - my soldering skills were a lot better by the time we finished.

Cheers

grigor Rising Star

grigor

Posted
Posted

A friend just installed this unit, about $380 ready to go.

It's not really suitable to move from car to car for tuning, like the 2AO, 2EO or LM1, more of a permanent installation.

But once it's connected to the laptop you're away. Add datalogit as per usual.

http://wbo2.com/2j/default.htm

Angus Smart Grand Master

Angus Smart

Posted
Posted (edited)

i built one of the kits from techedge www.wb02.com and its great! it may have been the older 2a0 kit but i've not really had a problem with it at all.

also havnt used it a great deal either but they are great! i need to plug it into my fcon and attatch the sensor still

Edited by Angus Smart
Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

I like Tech Edge. The guy is there to support you whever you need support and he is really friendly and knows his stuff about his products.

I am using the 2mb USB version of the tech edge and have found it great. I love the green display and can also use it on laptop if i like.

I would send anyone to buy the tech edge models because of the support you get in return is jut great. Where other products you are buying from a US company who dont give two shits about your issues.

Go the Tech Edge, support local company's.

Angus Smart Grand Master

Angus Smart

Posted
Posted
I like Tech Edge. The guy is there to support you whever you need support and he is really friendly and knows his stuff about his products.

I am using the 2mb USB version of the tech edge and have found it great. I love the green display and can also use it on laptop if i like.

I would send anyone to buy the tech edge models because of the support you get in return is jut great. Where other products you are buying from a US company who dont give two shits about your issues.

Go the Tech Edge, support local company's.

+1 on this also! one of the reasons why i bought techedge

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...