Jump to content
SAU Community

Dyno Day  

67 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Hey ppls,

Due to other dyno days being held around the same time SA/SAU usual holds their the Annual SA/SAU Dyno day hasn't been held. Its great for a checkup of how the cars running and mix it up with a few other SAUer's.

DETAILS:

BOOSTWORX - 57 Boothby Street, Panorama

TIME: Saturday 8th of March - 10:00am :- So get there 10mins early POSTPONED

The cost of the dyno day is $30 for 2 dyno runs and a print out.

A BBQ and refreshments will be provided charged very reasonably per snag and drink

Please do note there has recently been a little hoon activity within the area (which is believed to be related to the TAFE); Boostworx has been targeted as the possible offender; so please no burnouts or hooning through the sidestreets.

The plan is it will also be the first day of accepting SA/SAU club memberships which will be cams affiliated.

No prizes etc as the dyno runs are provided at cost - Makes it fair for the near stockers.

There's no limits on what cars can be run on the dyno; bring your old banga for a laugh if you wish. As long as your an SAU thats all that matters.

So.... Who wishes have a run on the rollers on the day and possibly buying a snag or two?

01. Darkhorse - PAID

02. Vietorious - PAID

03. Salad - PAID

04. RB_Man - PAID

05. matty_31 - PAID

06. Nightcrawler - PAID

07. Dangerman4 - PAID

08. rd-runr - PAID

09. sambo33 - PAID

10. RB25DETS2 - PAID

11. 93R33 - PAID

12. wegs - PAID

13. J_Red33 - PAID

14. 180or200- PAID

15. Hotwire

16. Deluxe

17. AfterGlo

18 32_4whore

19. Heslo

20. Advent34

21. bezender

22. rad510

23. writeoff

24. dnbutts

25. AFTDRK

26. ryanrb25

27. gzilla

28. barricade

29. gtrkiet

30. natoe aka slw 031 - PENDING

31. SICKR33GTS-T- PENDING

32. Cubes - PAID

Now accepting payment to secure your place and choice of when you wish to run.

Remember its cooler in the morning. :P

We have the minimum 10 upfront payments to go ahead; if you wish to secure your spot and have a choice in when you wish to run get your payment in.

PM me for bank deposit

TIME: 8th of March 2008 - 10:00am so get there 10mins early.

AND FOR THE RESULTS...

post-382-1204964458_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/191361-sasau-30-dynobbqclub-day/
Share on other sites

  • Replies 326
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Will this be at Boostworx again? Is January an ideal time to run a dyno day? It will probably be pretty damn hot. I'd say April/May would be better although with current climate patterns - or lack there of - it may be cooler in January. I'd prefer the 19th as I usually have something on Australia Day.

Yes It will be at Boostworx again. Boostworx have the best price for a dyno day.

Myself I'm not too keen on spending $50 for a power run that some of the other dyno operators are charging when all you receive is a laminated dyno sheet with possibly a picture. GW does both 2wd and 4wd $40 and $50 respectively but $10 is $10.

I feel $30 is quite reasonable. A BBQ and Cold drinks will be available; Boostworx also has evap aircon so there will be plenty of air movement.

If the weather is possibly hot/warm it could be a really good time to hold a dyno day depending on how you look at it.

Its always good to have the car on the dyno during hot weather as you are able to find out how it runs in such conditions.

Is it pinging. Is it safe to give it a bit of a boot during hot weather?

So for those of you that don't have the car run up both in cold and hot weather it will be a good chance to see if the car is running well.

However... If the majority would like the day to be held a little later by all means it can be done. :P

I personally don't mind the idea of a warm dyno day as its a good check up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...