Jump to content
SAU Community

Recommended Posts

Hey I got a few questions for you guys. I just bought a 1989 GTS-t. It has aftermarket exhaust, intercooler, intake, bov, and tuned computer. The deal is it idles kinda rough and when you let off the gas after revving it up the RPMs drop way low like 450 or so, it almost stalls. Another thing is horrible, I mean awful performance. I tested it from 0-100km/h and it took 8.869secs!!! Not anywhere close to stock! I'm hoping that it needs a tune-up really bad. Maybe a fried spark plug or a bad ignition coil. Could one of these things cause the performance to be that bad?

Link to comment
https://www.sau.com.au/forums/topic/19141-horrible-performance/
Share on other sites

your nearly stalling problem after revving it up is due to the BOV. the spring tension needs to be increased a bit, simple fix if your bov is adjustable. Sounds like you need to get a good tune

- theres no way you can be in japan?! why on earth would you need advice from australia?

And you no write broken englis.

check this thread:

http://www.skylinesaustralia.com/forums/sh...s=&threadid=408

curiously, changing to copper plugs gapped @8mm fixed my stalling problem - so it seems it could be any one of three issues

BOV, fuel pressure or in my experience, plugs !

must be difficult for you not speaking Nihongo...

Good Luck with it.

netrati,

have a look at this thread: http://www.skylinesaustralia.com/forums/sh...s=&threadid=408 could also be the problem at low revs.

Plugs never hurt, esp as NGK coppers are about AUD$20 a set, clean your afm, change the fuel filter and reset the ecu - different car (hopefully) :)

I had dramas with the previous owner's adjustment on my Blitz BOV, a simple tweak and she was running sweet. But now that I've just plugged in the Power FC (yet to be tuned), yeah I get higher revs when first turning the car on (like 1400rpm), but it rarely comes back down to where it would ordinarily idle wehn warm on the stock computer (700rpm). And when decelerating coming up to a roundabout for example at 30km'h in 2nd, as I exit the roundabout my revs will rise and I can actually increase my speed without touching the accelerator. I know the base program is not so great - typically running rather rich - but is the car feeding more fuel to the engine and at the same time being misread as throttle when the clutch is out and my foot's off the accelerator? WTF?

The mind boggles. There I go, having a spit when all it probably needs is a tune...

Anyone ever experienced anything similar though?

Cheers!

OMG. u're in japan! Can u get me some parts? - I hear 18" rims r only $400/$500 there 2nd hand. I want some! lol.

Back to ur question. my bov did the samething. after like 2 weeks, i reset the ecu once too, everything was fine. Guess i was just lucky. anywayz how about those rims :) I'm pretty sure there will be a few guys in Japan who can help u out - $ is an universal language of requiring their services.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi All,    I have my BW EFR 8474 with a T4 split 1.05 rear housing. Rear housing is ceramic coated and drilled and tapped for EMAP take off.  Supported 520awkw at 35psi through the 8HP with ~5k rpm spare on the BW 127k limit. Ran a 9.98.    Turbo is one of the first that was released but only done ~3k kms.    Asking $2800 happy to negotiate. Only selling to upgrade.   Located Gladstone QLD happy to ship. 
    • Hi is the Toshiba sceeen still available?
    • Just wondering how come the hood was grinded down? 
    • I have no hard data to report, but I have to say, having driven it to work and back all week, mostly on wet roads (and therefore mostly not able to contemplate anything too outrageous anywhere)..... it is real good. I turned the boost controller on, with duty cycle set to 10% (which may not be enough to actually increase the boost), and the start boost set to 15 psi. That should keep the gate unpressurised until at least 15 psi. And rolling at 80 in 5th, which is 2050 rpm, going to WOT sees the MAP go +ve very quickly and it has >5 psi by the time it hits 90 km/h. That's still <2.5k rpm, so I think it's actually doing really well. (I edited this from a previous version where I stated 80km/h was <2000, but that was a false memory. If I am rolling at ~1700 in 5th and floor it, it will start making boost before it goes over 2k - which is a separate "experiment" leading to the same conclusion. Which is that the boost threshold is actually quite low. It's not fast there, obviously, but it certainly makes progress towards going fast, which is not what it's been like for a long while!!) Because of all the not-quite-ideal things that have been in place since the turbo first went on, it felt laggy. It's actually not. The response appears to be as good as you could hope for with a highflow.
    • Or just put in a 1JZ, and sell me the NEO head 😎
×
×
  • Create New...