Jump to content
SAU Community

Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

Pretty sure they're not direct injection - which is a bit of a dumber and not just for emissions control. Anybody know what type of engine management ie spreed density or twin AFM's? Has nissan given up on EMS and just relegated bosch to do there engine control? Aslo are there two 02 sensor on each bank ie before and after catalytic converter? One way fuel system?? Surely there is moe info out there.

i don't know why they don't just run the outlet from the turbo through a single divided long intercooler core and into the opposite bank of cylinders instead

they guys making it had friends in tuning shops and aftermarket intercooler factories and wanted to leave them with some work! :ninja:

Same as porsche turbo

it's not like they could put a long divided intercooler in the back of the 911 bumper bar, with the exhaust and lack of airflow and whatnot

I was thinking that too, you'd think there would be a little less pressure drop

all those bends look like a massive flow restriction

they guys making it had friends in tuning shops and aftermarket intercooler factories and wanted to leave them with some work! :)

shifty work on the part of HKS, Top Secret and Signal, eh? lol

  • 3 weeks later...

back on topic, I think people are confusing the R35 GTR with the Skyline GTR's.

It's not a skyline. It's not a daily driver that's had a magic wand waved over it. It's a (relatively) cheap supercar. It's designed to be a collectors piece from day one. Handmade engines, new technology, advanced driver aids, this isn't a car for the street, it's a car you either tune for racing, or a bauble you brag to your other banker/ footballer friends about owning.

Maybe in five years time, things may change. They may make a more mass produced model, resulting in more cost effectiveness. To be honest, I can't see much profit coming directly from the R35. The price point seems too low for the amount of labour, research, development etc. that went into it, so it seems like it's a hero car, an example of what they can do, more than an attempt at making a supercar for the common man.

due to the low volume, I don't expect it to drop dramatically in price like the skylines. I also don't imagine that there'll be the same amount of aftermarket support, unless the volume of cars produced is upped.

To be fair though, if the R35 lives up to hype, Nissan would be stupid not to capture that reputation and make a new skyline based on that technology, possibly a stagea too. Simplify it a bit, mass produce everything and THEN you'd have a car that tuners would love. (cheaper too)

It's really comparable to the supercar range. The only real mods that supercars get done to them are paint, wheels, interior and LCD screens everywhere.

I can't see it being cost effective to ship an engine to Australia in less than 5 years, and that's being optimistic. Though, if I'm wrong, and somehow the engines magically become cheaper and more plentiful, I'd love to see one in an R32, of course I would. But as long as the onyl way you can get it is to buy the whole car, why would you?

Forget the GTR engine, I'd like to see the 7.0 V8 from the Z06 running a twin turbo or big single setup in a r32-r34 GT-R.

If it could be adapted to the ATESSA-ETS system, that would be a killer combination!

Close???

Type in 'gt autosound/dls r34 skyline' into www.google.com.au and you will see it. Would post a link but work blocks most of the sites its on. Saw it in Adelaide, it looks pretty nice and makes huge power. Its a drifter, this is proof that people have too much money and/ or are insane.

Edited by harvesteros
  • 11 months later...
Forget the GTR engine, I'd like to see the 7.0 V8 from the Z06 running a twin turbo or big single setup in a r32-r34 GT-R.

If it could be adapted to the ATESSA-ETS system, that would be a killer combination!

now your talking!! BULK TORQUE!!

like they say anythings possible with deep enough pockets

back on topic, I think people are confusing the R35 GTR with the Skyline GTR's.

It's not a skyline. It's not a daily driver that's had a magic wand waved over it. It's a (relatively) cheap supercar. It's designed to be a collectors piece from day one. Handmade engines, new technology, advanced driver aids, this isn't a car for the street, it's a car you either tune for racing, or a bauble you brag to your other banker/ footballer friends about owning.

Maybe in five years time, things may change. They may make a more mass produced model, resulting in more cost effectiveness. To be honest, I can't see much profit coming directly from the R35. The price point seems too low for the amount of labour, research, development etc. that went into it, so it seems like it's a hero car, an example of what they can do, more than an attempt at making a supercar for the common man.

due to the low volume, I don't expect it to drop dramatically in price like the skylines. I also don't imagine that there'll be the same amount of aftermarket support, unless the volume of cars produced is upped.

To be fair though, if the R35 lives up to hype, Nissan would be stupid not to capture that reputation and make a new skyline based on that technology, possibly a stagea too. Simplify it a bit, mass produce everything and THEN you'd have a car that tuners would love. (cheaper too)

It's really comparable to the supercar range. The only real mods that supercars get done to them are paint, wheels, interior and LCD screens everywhere.

I can't see it being cost effective to ship an engine to Australia in less than 5 years, and that's being optimistic. Though, if I'm wrong, and somehow the engines magically become cheaper and more plentiful, I'd love to see one in an R32, of course I would. But as long as the onyl way you can get it is to buy the whole car, why would you?

I fully understand your point, but another view may be this: R32 GT-R = Group A racecar, made in numbers to meet homologation requirements. Hardly a daily driver with a magic wand over it, perhaps? Thoughts, anyone?

That said, the 35 is a very, VERY sexy piece of kit. It just doesn't have the racing soul.

From experience over the past few months i can tell you that a brand new Porsche 997 Turbo crate engine from the mother land is gonna cost you $155,000, since the GTR is suppose to be a turbo for half the price, would it be wrong to assume that you would be paying 50-70ish grand for a new crate engine for the GTR?

I fully understand your point, but another view may be this: R32 GT-R = Group A racecar, made in numbers to meet homologation requirements. Hardly a daily driver with a magic wand over it, perhaps? Thoughts, anyone?

That said, the 35 is a very, VERY sexy piece of kit. It just doesn't have the racing soul.

i dunno how much more racing soul you want other than a bespoke design supercar that's designed from the ground up to give the shaft to other supercars. all that compared to a homologation model of a family sedan (C10 GTR thru to R34 GTR)... I'd go as far as saying it had more racing intent than its predecessors.

Its like saying the Falcon has more racing soul than a Ford GT cos it competes in V8 Superbarges.

i dunno how much more racing soul you want other than a bespoke design supercar that's designed from the ground up to give the shaft to other supercars. all that compared to a homologation model of a family sedan (C10 GTR thru to R34 GTR)... I'd go as far as saying it had more racing intent than its predecessors.

Its like saying the Falcon has more racing soul than a Ford GT cos it competes in V8 Superbarges.

Was the 35 designed as a race car first and foremost, and a road car secondly? I've missed something...

Was the 35 designed as a race car first and foremost, and a road car secondly? I've missed something...

NONE of the GTRs were.

PC10 came out before the KPGC10 GTR, R32 GTS came out before the R32 GTR, etc etc. The R32 GTR's design for example was finalised AFTER the R32 GTS had left prototype stage and was about to be produced.

they all took an existing platform and made a race sedan out of it.

The R35's the first GTR that's not based on a sedan... which is why they dropped the Skyline moniker. It was designed to be the stallion in Nissan's stable from the get go. Besides, there's a world of difference between a gutted out rattley stiff suspensioned billion fuel pumps buzzing slick wearing race car and a road going sports car.

there's a world of difference between a gutted out rattley stiff suspensioned billion fuel pumps buzzing slick wearing race car and a road going sports car.

LOL; couldn't agree more! I would much rather the 35 to a highly modded earlier GT-R of any model for road duties, and I'd still pick it over any 'real world' supercar. I can't see any way, even with all the money imaginable, that a Veyron or a Pagani etc would be any more 'liveable', either...although a full carbonfibre Zonda is pretty sexy! So the 35 is still the king dingaling of road cars.

I s'pose I was thinking of the R32's race history, how many races it won that it entered everywhere blah blah blah; I'm assuming the 35 will get raced more and more, but in a different world now where it probably can't match the history only because of rules, regs, events and so on. I think the new car will have a good crack at things, if allowed!

Back on topic; a 'crate' 35 engine would be lost in any other car, regardless of cost, IMHO. Considering what Nissan invested in getting the balance 'just right' as a whole car, we could almost start a thread here about what a top fueller engine would be like in a Skyline...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
    • Hi all. So one of my major issues at the moment is my rear turbo leaking oil on the exhaust (and the general area). I presumed it was the rock hard super old drain hose, which it was not. So now I am in the midst of removing the rear turbo to get access to the banjo bolt that goes into the turbo oil feed. As one of the previous owners accidentally? tore off the OEM oil feed hardline that reaches behind the turbo, they ran braided lines directly to the turbo, presumably PTFE. Now, regardless if the line has rubber or teflon inside, is it just generally a bad idea to do this? I imagine these lines get quite hot being between the engine, turbo core and exhaust manifold. I suppose it's not too far fetched to think the line may even have melted. I'd love to hear your opinions on this as as the replacement OEM hardline piece is 130 per unit. And cutting open the currently mounted line to see inside will mean I just have to get a replacement either way. So far I am hoping maybe the bolt just loosened or (god forbid) they forgot one of the crush washers.
×
×
  • Create New...