Jump to content
SAU Community

Good Panel Beater Perth

Wishbone

By Wishbone,
in General Automotive Discussion

 Share

Recommended Posts

Wishbone Apprentice

Wishbone

Posted
Posted

Hey all

Just lloking for a good panel beater in Perth. Pref with a laser alignment machine. I had my car fixed at Duracraft in Myaree and am not happy at all. After sitting around for 2 months getting fixed it looked like someone gave it a 2 minute once over with a wet cloth – still got paint dust in my upholstery. Then there’s the small bits and pieces like small air diffusers and other little plastics that are missing. Then to top it all off I took it to a mates workshop because it just doesn’t drive right and looking under neath nearly every nut or bolt they have touched are all scored and damaged from using the wrong size spanner !!!!!! As it turns out the right crossmember in bent where it connects to the chassis rail ( I think that’s what he said :P and who knows what else.

So after my little cry back to the point – need to find a reputable panel beater to look over the job and get any probs fixed. Hopefully I can find one that will play nice with HBF Insurance (Apart from the above HBF were awesome)

Cheers

Wishbone

Link to comment
https://www.sau.com.au/forums/topic/191585-good-panel-beater-perth/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • KyoyaR33
      Rebuilt Rb25det issues

      By KyoyaR33 · Posted

      I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • GTSBoy
      Rebuilt Rb25det issues

      By GTSBoy · Posted

      Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Victory
      Neil's R33 Gts-t Build

      By Victory · Posted

      Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Milkmun
      S15 Spec R

      By Milkmun · Posted

      Wow that's a steal, you've done well there. 
    • trey318
      r34 gtt led globes

      By trey318 · Posted

      Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...