Jump to content
SAU Community

Recommended Posts

Yeah mine has it to. Allthough when we replaced the windscreen just put a standard one in there. Couldnt justify the price difference for the amount of time im likely to use it.

Didnt know it did the mirrors though, might have to try it.

bit of a hijack

but what does the button do which is located behind the steering wheel on the dash which looks like

.I--o--I.

.....l......

.....S.....

.....l......

.I--o--I.

(ignore .'s)

sorry for the crude font sketch

and what is the purpose for the snow switch on the console

it is an rs4 - so i guess it just shifts to 2nd early to stop spinning yeah?

Edited by 910trx
put everyones mind at ease, when i pick my car up.

its got the owners manual (english) i will just copy down what it says in there then , mystery solved !

RBPOWA have u got a scanner. can u scan the manual and put it all up for us. Will take a while but will help alot.

ok got the book back. word for word on this switch from my manual

WIPER DE-ICE SWITCH (grade)

The ignition must be ON. It is designed to heat the lower part of the windscreen trough embedded heating wires to help melt any ice that has formed around the wipers.

Press the lower part of the switch and the system will turn on for 15 minutes, then automatically turn off. If your wish to turn the de-icer off manual simply press the lower part of the switch.

this part is from the adivce section .....

' in vehicles with door mirrors, the door mirror heaters will also operate when the rear defogger switch is pressed.'

  • 2 weeks later...
ok got the book back. word for word on this switch from my manual

WIPER DE-ICE SWITCH (grade)

The ignition must be ON. It is designed to heat the lower part of the windscreen trough embedded heating wires to help melt any ice that has formed around the wipers.

Press the lower part of the switch and the system will turn on for 15 minutes, then automatically turn off. If your wish to turn the de-icer off manual simply press the lower part of the switch.

this part is from the adivce section .....

' in vehicles with door mirrors, the door mirror heaters will also operate when the rear defogger switch is pressed.'

I'm going to have to check if my aussie mirrors will de-fog , I know that windscreen de-icer works.

But the real question is:

What the heck does the 'Light Reduce' switch do? And it is messed with at compliance? I'll be damned if I can detect anything changing on my car with it 'on', so I leave it 'off'.

I've heard plenty of 'theories', but no definitive answer. Further to that, if the feature is useful, then I'd like to know how it's been disabled at compliance. I have found no power on any of the wires going to the switch, nor any fuses that seems to relate to it.

If you do not have xenons it could be this:

post-37588-1237451961_thumb.jpg

From what I can make out, it increases or reduces the intensity of your headlights depending on what your are doing eg. stopped at lights - low intensity, driving at high speed - high intensity, it may even lower the intensity when you are passing cars, I'm yet to work it out. There's something you can try on the weekend.

P.S If you have "aussie compliance" mirrors they will not defog.

If you do not have xenons it could be this:

post-37588-1237451961_thumb.jpg

From what I can make out, it increases or reduces the intensity of your headlights depending on what your are doing eg. stopped at lights - low intensity, driving at high speed - high intensity, it may even lower the intensity when you are passing cars, I'm yet to work it out. There's something you can try on the weekend.

P.S If you have "aussie compliance" mirrors they will not defog.

Cheers 'Stagea' :P

That sounds about right, but I'll be damned if I can actually notice any change (had the car for 4+ years!). I'll turn it back on & have another look, but I expect that compliance has interfered with it (I suspect that such a feature wouldn't be ADR compliant).

Suspected as much about the mirrors - the lack of convex is a real bugger. One day I'll get some JDM mirrors to fix the issue...

Edited by BensDR30
have you changed the batteries? do the lights come on or does it beep when you push them?

there is a switch, down near your right leg under the dash on the right

That was my first thought, no I haven't yet. The light comes on on the remote starter, no beep tho. Should probly change the batteries first and then start looking elsewhere.

CHeers

Hey there

The switch that you are talking sounds like it could be to heat up your wipers, you can tell by having a close look at your windscreen, if it does have the heating elements in the glass they are orange in colour and usually have three long strips where your wipers sit in the off mode. If the heating elements are in the black part of the glass (ceramic) it will be very hard to see but you should see them.

If you do happen to have the heated windscreen make sure you have glass cover on you insurance, if you think the price of a normal windscreen for a stagea is expensive wait till you find out how much a heated one is!!!!

Damn straight, thats why I just went with a standard windscreen. I mean when am I going to use it in QLD. But at least I still get to defrost my mirrors :P

was the car fitted with an immobiliser or alarm on compliance or after?

Far as I know there's no immobiliser, the bloke I bought it off hadn't fitted anything to it. And he got it from an importer, and the import ad says nothing about an immobiliser. Or an alarm for that matter.

.

As you may have already guessed I am, what I believe is classified as, a noob! So here's a pick of what I've got.

PqiRGA.jpg

aVj0OA.jpg

gxchzJ.jpg

This add was made in January last year, that's when he bought it. And I got it for $9900 :P

Thanks for your help

Did the car with any other remotes?

Try pushing the start button twice with a 1 second gap in between.

Did you find the master switch in the right hand drivers footwell?

Experimentation it the key (no pun intended)

You'll need to use your powers of deduction to work it out.

What state are you in?

Did the car with any other remotes?

Try pushing the start button twice with a 1 second gap in between.

Did you find the master switch in the right hand drivers footwell?

Experimentation it the key (no pun intended)

You'll need to use your powers of deduction to work it out.

What state are you in?

No other remotes, only other remote is central locking on the key.

I did try pushing the start button several times, with various time lapses. But I will try again.

There is also a button in the middle, I'm not sure what it's supposed to do, when I push it the red light above it flashes intermitantly for a few seconds. If I push the start button whilst the light is flashing the light stays on without flashing for a few seconds.

I deduce that perhaps the middle switch is to arm the remote start. Would this be plausible?

However when I tried this it still did not work.

I also tried it with the car unlocked, and siting inside. Nada.

I did find the master switch, and I tried the remote start with it in both positions (up and down).

And still nothing.

I will try all these things again, just to double check.

But failing that, should I just give up?..........No there must be a way!

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...