Jump to content
SAU Community

Recommended Posts

you don't really buy a GTS for power. however if you do want a little bit more there are a number of things;

-nitrous

-turbo conversion

-rb30 conversion (engine transplant though)

-intake

-exhaust

-cams

-timing

-ecu/piggyback

a search on any of those keywords should yield more details.

if you're interested there's a group buy currently in the works for extractors.

http://www.skylinesaustralia.com/forums/t189629.html

we don't really need more threads for 'how to get more power', there is a plethora of information on the forum with extensive details and results. give them a go.

when i get time i shoud write up a sticky thread collating all the data.

theres plenty of threads on this even a couple i had heheh

but for my N/A with out goin into too many high tech mods

air/pod filter

extractors

exhaust

with a good setup it should give you raise in roughly 20-25kw if your lucky

this is what im planning on getting done then rims and maybe bodykit later on

Dont waste your money, take it from a guy who owns the same car. Spend your money on a nice car entertainment system. Trust me you would rather have a sound system than the 20kw because you wont notice the power i guarentee you that.

Save your money until you get your full license and get a GT-R.

yeah it all depends how much $$$ you got to spend...i did headunit, amp, sub n speakers first..at the end of the day if you tihnk about it not point wasting thousands on power only to go the speed limit fair enough exhaust cai n that but wouldnt recommend much more unless your serious about your car and its power output...just my opinion though. gl

20kw because you wont notice the power i guarentee you that.

Save your money until you get your full license and get a GT-R.

a 20kw increase where? top end, mid range, low rpm??? the kilowatt is one thing, driveability is another.

you'll be saving a long time to own a GTR :w00t:

not point wasting thousands on power only to go the speed limit fair enough exhaust cai n that but wouldnt recommend much more unless your serious about your car and its power output...just my opinion though. gl

correct. unless you intend on fully utilizing the mods for (bragging rights not included) there's no point.

even some of the 300HP GTSTs are being wasted cruising from carpark to carpark...

..guh.. >_<

Can we please Sticky a unversal "How do I get more power?" and "What do I need for my exhaust?" thread!?!?

In all honesty.. there isnt much you can do to get decent power out of an RB25DE without taking out the block..

As said before.. pretty basic plan is

Intake

New cams

Ajustable cam gears

Port and polish

Shave/deck the block

headers

Zorst

ECU and re-tune..

Work your way through that.. and you should be sweet..

I suppose if all done well you could get 160kw.. perhaps?

You could always go a 3L bottom end.. Could have you pushing 220kw.. perhaps..

With NA engines.. dont aim for a "larger power figure" thats all bolocs.. aim on making your engine more resposive with a larger powerband..

Hey man, im sortah in a simillar boat to you, i been doin alot of reading and i think ive worked out the best way to get the most out of my car without goin to far overboard... i have a 96 s2 r33 gtst (turbo version) so this is my rough action plan (if urs is non turbo just ignore the turbo components). First thing i did was car alarm, tinted windows, car stereo, and 19" deep dish x factor rims... then i did the increase boost mod u see on these forums to bypass the dual stage boost and set it to a constant 7/8psi... and these r my plans for whats commin next... (in no real order)

96 Nissan Skyline R33 Series 2 GTS25T

Future Modifications:

- Exhuast - full 3" split dump and quality 3" high flow cat keepin size all the way to the back, mandrel bent with high flow muffler

- Intake - Apexi POD Filter with cold air box and cold air intake (this will allow u to hear turbo without need for BOV)

- New Springs to lower the vehichle

- R34 GTT Side Mounted Intercooler

- Turbosmart dual stage boost controller OR R32 Wastegate Actuator to increase turbo boost pressure to 10/11psi

- Turbo timer

- Neons

- Apexi Power FC ECU upgrade

- Dyno Tune

Edited by Alex_r33s2gts25t

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
Ă—
Ă—
  • Create New...