Jump to content
SAU Community

faulty fuel indicator please help

GunMetalR33
 Share

Recommended Posts

Steve Grand Master

Steve

Posted
Posted

2 ways,

1 got to a guage/instrument shop and get it calibrated,

2 after you fill up, remove the dash, gently pry the needle off and, with the cluster plugged in and ignition switched on, replace the needle.

I had a few probs with my guages after fitting EL background, just recalibrated using mk1 eyeball, ie, the latter option:)

Steve Grand Master

Steve

Posted
Posted
Originally posted by GunMetalR33

A friend of mine seemed to think the problem would be at the fuel tank end. He said the r33's often have there float fall of, do you think that could be it?

Yes, just reset the position.

Have you quizzed your friend on the source of his info? I have never heard of this happening, and if it is 'often' I believe I would have heard of it. Besides, does the R33 use a float or sensor?

blind_elk Grand Master

blind_elk

Posted
Posted

It's probably a fault in the sender (getting old). It's jamming when you have a full tank, and the weight of the float can't unstick it until around 1/2 tank or so.

Mine actually seems to manufacture fuel - I'll be driving along on say 1/2 tank, next thing I know I've got a full tank, then 3/4 tank.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Comfortable replacement seats for R32 GTR

      By Murray_Calavera · Posted

      As strange as this sounds (as they are fixed back), my Bride Xero CS seats are the most comfortable seats I've used.  I vote go genuine.  The only downside I've found is on very long drives, you can't reposition your body while driving. So even though its comfy, being locked in the same position eventually becomes uncomfortable. I find myself stopping every 3 or so hours to stretch my legs on long drives. 
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      You don't have to be bored driving a Camry. Not based on the way that a couple of f**king Ubereats/Didi/othersortofmethaddlednightshiftattheservicestationrecentimmmigrants were piloting them on the way to work this morning. f**k me dead!
    • GTSBoy
      Comfortable replacement seats for R32 GTR

      By GTSBoy · Posted

      FWIW, the Bride reps are really nice to sit in. The only complaint I have, other than the tear in my bolster, is that the velcro used to hold the backrest cushion in place, up under the headrest, is a little obvious and intrusive and could probably be done better. I don't know if that is a "feature" on the genuine ones also though. I haven't looked at a genuine one like the ones I have, only some of the older models. The other thing is, even though I bought the CF ones, I think the CF is really just decorative, over the top of the same FG as the normal seats. And so they really aren't light. Between the solidly built CF/FG seat, the steel frame in the recliner mechanism, and the solid-arse seat rail, they are probably heavier than even the stock seat. They are a serious lift to get in and out of the car.
    • GTSBoy
      ugently need expert / experienced opinion

      By GTSBoy · Posted

      Yes, and so the barest minimum power target is the one that makes the most sense. Massive power is fun, but you can only use it for 1.5s at a time, and only every now and then. Medium power levels allow you to enjoy the car far more often and for longer. 500 engine HP is just below 300 rwkW which is about the maximum that is sensible for any street car really. And for a 2.6L six, it will still leave you with a decent boost response and some sort of linearity of power delivery. As you get up towards 400rwkW the onset of power tends to be increasingly like a cliff and you need drag radials to keep the ground in proper contact with the car, and.... it's just not a car for driving around any more.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I already reached that conclusion myself after reading up a whole bunch and watching various videos from multiple sources. Don't know yet how I'd best manage that with the least amount of headache. Probably pulling the sump and just welding on a AN10 adapter or something. I also think it's healthy to take most opinions with a grain of salt, because experiences differ wildly and especially Aussies - when talking about RBs - don't know a world below 600whp drag builds. Personally I doubt I will ever take my R33 racing, so it's going to be a street car with the occasional spirited drive. Hence why I am (so far) under the impression that I'm going to be fine with a stock-ish engine for a while.
×
×
  • Create New...