Jump to content
SAU Community

Upgrade Help

KrisG

By KrisG,
in Engines & Forced Induction

 Share

Recommended Posts

KrisG Enthusiast

KrisG

Posted
Posted

Ok Guys, Its time to get some more power out of my RB25.

Currently im getting 190rwkw on stock turbo and stock ECU.

Mods are :

Greddy FMIC.

SAFC-2.

3 Inch Turbo back zorst with hi-flow cat.

HKS EVC5 Boost Controller set at 9 and 14 psi.

Apexi Pod.

Apexi ITC (ignition timing controller unit)

I am chasing around 230-260 rwkw.

I Know i need 550cc injectors and a fuel pump, but what turbo should i choose and what ecu. I dont know if i can run 260rwkw with stock ecu can i?

The engine is sound with over 150psi per cylinder ive had the car for 6 months now and there hasnt been an issue.

So yeh what turbo,ecu ect do i need?

Any help would be great.

Link to comment
https://www.sau.com.au/forums/topic/191947-upgrade-help/
Share on other sites
sly32 Proficient

sly32

Posted
Posted
  KrisG said:
Ok Guys, Its time to get some more power out of my RB25.

Currently im getting 190rwkw on stock turbo and stock ECU.

Mods are :

Greddy FMIC.

SAFC-2.

3 Inch Turbo back zorst with hi-flow cat.

HKS EVC5 Boost Controller set at 9 and 14 psi.

Apexi Pod.

Apexi ITC (ignition timing controller unit)

I am chasing around 230-260 rwkw.

I Know i need 550cc injectors and a fuel pump, but what turbo should i choose and what ecu. I dont know if i can run 260rwkw with stock ecu can i?

The engine is sound with over 150psi per cylinder ive had the car for 6 months now and there hasnt been an issue.

So yeh what turbo,ecu ect do i need?

Any help would be great.

hey, if you have 190kws with that stuff, upgrade your turbo to a 400hp turbo maybe bit bigger if you want. you will have to change your ecu, your car will not run with a bigger turbo and no ecu, with a 30/40 turbo or something a tiny bit smaller and a power fc you would easy get 260rwkw,

JV

Link to comment
https://www.sau.com.au/forums/topic/191947-upgrade-help/#findComment-3452293
Share on other sites
RPR33 Community Regular

RPR33

Posted
Posted

quote]What is a DR DRIFT remap? Is that on the stock ecu?

yeh mate Its a remap of the stock ecu. as far as I know there better then buying an power fc, only hassle is that you'll have to get a re-map every time you change something like your turbo or injectors. so put the whole lot in and have it remaped for the lot to start with and it'll be sweet. then let me know how it goes so I can follow your steps :(

Link to comment
https://www.sau.com.au/forums/topic/191947-upgrade-help/#findComment-3453516
Share on other sites
BHDave Grand Master

BHDave

Posted
Posted
  13thracer said:
highflow turbo and a power fc if you can find one (spend the time and try to find one) and z32 AFM, you will love it

+1. nismo 555cc injectors too. It is the best solution.

AFAIK dr drift is the only one locally who can do real time tuning of the stock r33 ecu and it is no where near as cheap as an r32/s13. Unless you live within driving distance of his home base then forget about it and get a stand alone ecu that you can get tuned by someone reasonably close to you.

Link to comment
https://www.sau.com.au/forums/topic/191947-upgrade-help/#findComment-3454064
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      It's not any meta data. They have scraped images from everywhere, and then use AI to compare your photo to other photos and work out where you are.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I just looked at my camera phone settings, apparently I have "not allowed" for location  Will that stop that app?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Can you not just turn it off on your phone if required? I remember a brief on this, well, I remember the brief, not what to actually do. LOL
    • Komdotkom
      Forced Performance Hta Turbos

      By Komdotkom · Posted

      Thanks for posting, your engine bay looks tops. I'm fairly sure you posted the wrong video though, I think you were supposed to upload the one from your "private test road" where it's banging off the limiter with the gate open?
    • MBS206
      Stagea obd II low voltage

      By MBS206 · Posted

      This is something to be careful of. I did a bit of digging on the NM35, as I spend a lot of time on near brand new cars and CANBus related stuff, which uses the same "OBD2" plug for a fair chunk of making my life easy. The NM35, does NOT support OBD2. The data pin is actually on Pin3, which is a manufacturer specific pin, and requires Consult3 to connect to the NM35. Your low voltage, is either because the NM35 doesn't have 12V to the constant power pin on the J1962 (OBD2) connector, OR, it is attempting the standard comms, (CanBus, K Line, etc) and can't see any voltage on those pins. Some people have had success accessing SOME data from the vehicle on OBD2 specification, using a module that supports KPW. My assumption, like Duncan has stated, it will likely actually be JOBD, where there is some cross over with the OBD2 and JOBD standards. Note, lots of "OBD2" dongles, do NOT support KPW, which is what you need for a lot of Japanese vehicles of this era (And even up until recent years!), EG, Subaru, Suzuki, etc.    The end of this thread is probably worth a read, as some people did find a way to get a display up in the NM35 recently, looks like someone implemented all the stuff needed to make it work. (The right protocols).  
×
×
  • Create New...