Jump to content
SAU Community

Recommended Posts

it just looks a little too rich to me (good cos most r32's I have seen run lean)

note how the ecu has richened up the the fule for a second when boost came on at about 3200 rpm and then nealy over compsated for it.

With regards to your question the right hand scale is A/F 11 is rich

14 would be too lean your car dosn't look to bad.

Link to comment
https://www.sau.com.au/forums/topic/19202-dyno-print-out/#findComment-403199
Share on other sites

It has a different turbo....it was on it when it came from Japan. Not too sure what it is but looks similar to a 2530. Other mods include 550hp intank fuel pump, bleed valve set to 13psi, 3inch zorst turbo back, air pod. Standard computer, no AFC, standard injectors, standard intercooler. Next mod for me is definately the front mount!!! I want over 200rwkw....then i'll be satisfied.

Scott.

Link to comment
https://www.sau.com.au/forums/topic/19202-dyno-print-out/#findComment-403423
Share on other sites

standard cooler! wow! you must have a pretty efficient turbo to pull that power and run safe with a standard cooler, whatever it sounds like it works well!my dream would be to have an HKS 2530 on mine.

let me know how it goes when u get that cooler fitted and the boost wound up no doubt :)

Link to comment
https://www.sau.com.au/forums/topic/19202-dyno-print-out/#findComment-403451
Share on other sites

Don't slap a fuel pump on it unless you really need it as you will loose power.

UNLESS you have a fuel comp and are going to tune it when you fit the bigger fuel pump.

The bigger fuel pump made mine loose almost 20rwkw and the AF's were around the 11's origionally like yours.

Link to comment
https://www.sau.com.au/forums/topic/19202-dyno-print-out/#findComment-403787
Share on other sites

Guest Boxhead

well to ad confusion or not haha, can someone tell me exactly what my a/f are doing?

they basically run just below the 13 all the way along except for the end of the dyno were when teh power starts to die off it starts to raise just above 13, and looks like if we kept going it would keep rising..

sorry i couldnt post a pic as some how the usb cable for my cam is lost...

Link to comment
https://www.sau.com.au/forums/topic/19202-dyno-print-out/#findComment-404245
Share on other sites

impressive Bbenny.

I had my R33 dynoed at procar a few weeks ago and managed 252rwhp at 0.8bar (about 12psi).

I got Paul and the team to tune my powerFC and from memory they managed 220rwhp @ 6-8psi or so.

My AFR stayed constantly 12 across the range.

Knowing nothing about dynos, maybe they didnt set the computer up correctly to mirror what revs your car was at?

Mine was the same - I was in the car and I can assure you that they took it past 5500rpm.

Mark

Link to comment
https://www.sau.com.au/forums/topic/19202-dyno-print-out/#findComment-404857
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...