Jump to content
SAU Community

Recommended Posts

I'm in for that, depending where you's going.. I'll bring the guys that come to my cruises too.. The more the merrier..

Unfortunately it's not a free-for-all as it is an official club event and as such is for members only. Like for example last years one was a navigation/orienteering event which involved material distributed by the executive (and helpers :D). Only financial members were able to enter/ had information as to where it starts etc..

also remember guys, members also get membership cards that entitle said members to discounts with reputable workshops/suppliers as well as a sponsors area within the members area of the forums that has extra special deals :).

sorry to spam this thread, and I'll do my best to come along to one of your cruises Assasin, maybe even this one. See you at the Pizza Cruise :P

Unfortunately it's not a free-for-all as it is an official club event and as such is for members only. Like for example last years one was a navigation/orienteering event which involved material distributed by the executive (and helpers :dry:). Only financial members were able to enter/ had information as to where it starts etc..

also remember guys, members also get membership cards that entitle said members to discounts with reputable workshops/suppliers as well as a sponsors area within the members area of the forums that has extra special deals :(.

sorry to spam this thread, and I'll do my best to come along to one of your cruises Assasin, maybe even this one. See you at the Pizza Cruise :rolleyes:

Well put. To join click the link in my sig

Well put. To join click the link in my sig

AAAANNNYYYYWAAAYYYSSSSS, this thread has been well spammed!

Just for the record everyone reading this, I'm only here to get drivers together and on the streets together. I have no interest in joining. My motive is to get people acquainted, people helping others with there skylines who have problems, and everyone just really having fun whilst out there, not to mention new friends being made along the way..

So back to the point of this thread everyone, I have now 10 cars confirmed going. Please let me know who else is interested. Sorry for the above spams to those guys who are car enthusiasts.

To everyone else who comes to the cruises, looking forward to seeing you's for the wisemans drive on the 11th Nov.

not sure if u guys have realised but autosalon final battle is on 1st and 2nd of december at olympic park. dunno if it matters...but it might make meeting at the carpark a bit difficult. could get pretty packed.



  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...