Jump to content
SAU Community

Recommended Posts

Spotted and picked up Pete (R34GTX) at Chapman and Chapman in the morning. Saw Dangerous Daveo's car at Northfield Moorooka (and Drews R34 GTT and GTR). Spotted n15m0 at around 7pm in the city picking up people. I pulled him over with my looks :O

spotted a stegea with R34 front end .. looked bizzare.. near autobarn slacks creek ..

Should go in the stagea spotted thread :O

http://www.skylinesaustralia.com/forums/in...showtopic=53437

Was it silver? Looks great, but for ~$7000 I'll pass, still now the stock stagea design has grown on me :O

Spotted and picked up Pete (R34GTX) at Chapman and Chapman in the morning.  Saw Dangerous Daveo's car at Northfield Moorooka (and Drews R34 GTT and GTR).  Spotted n15m0 at around 7pm in the city picking up people.  I pulled him over with my looks :(

I saw the GTT, didnt see the GTR...

I was getting my new head deck in, its very very nice. Best $966.00 spent ever.

spotted a red 32 rego try32 .. while cruising down coast with my mates in their liners last nite... if the owners on here.. i wouldnt get in front of cars then chuck cig buts out the window ..frekin thing was wedged in my cooler core

Edited by 53XYN
I saw the GTT, didnt see the GTR...

I was getting my new head deck in, its very very nice.  Best $966.00 spent ever.

hahah...you got it congrats? learn it all yet? is it the eclispe one you were talkin about? oh yeah, i went to talk to them about my boot and sound proofing....found out the boot is wrong...not really surprised...and a few things on the sound proofin etc.
Been seeing a silver stagea with the plates IOJ a lot around mt gravatt lately.

Heh yeah, I've waved before but I've been getting weird looks. Maybe they aren't really aware of what they are driving or don't like skylines

spotted a black GTR on the bruce Hway heading northbound just before the dohles rocks exit, also a very nice blue R32 with kit and front mount etc headin along the gateway motorway. orange R33 with dmd the image sticker on the side window and full kit and then on thelogan motorway 2 white R33's a series 1 and 2 following one another. was a busy day lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
×
×
  • Create New...