Jump to content
SAU Community

Recommended Posts

Dead stock 1998 Silver R33 S2 GTS25t. See if you can guess the rego...

Live in Wellington Point and drive to Amberley RAAF Base each day so I do a fair few miles. Gimme a wave if you see me.

saw a red r34 at yatala pies on sunday with the plates niz34

very sweet car, i spotted drift r rims, there appeared to be a front mount hiding behind the mesh too :)

Thank you belgarion for your kind words about my car.Yes there is something hiding behind the mesh :D plus some other goodies :Oops:

I did not see anyone in another Skyline where were you ? should have come up and said Hi.

niz i didnt see ya around the car and i was only stopin quickly to get a pie, my car didnt actually turn off thats how quick i was :D

i parked out the front of yatala, pretty much adjacent to your car

chaos... details, now

damnit i thought i was the only green 33 :|

was it green like mine?

Belgarion / nismogirl, sorry i didnt come and say gday at the carpark the other nite, was with a pretty big group (redlineau - mainly gti-rs) and turned around and you'se had gone :S

Hehehe, you said hi to me tho!

But yeah, carpark has been picking up lately, its good.

Hey Peeps,

Well I thought I should post here...

I bought my girlfriends 1996 R33 GTST (white with GTR wing, skirt and rear pod) off her about a week ago after I sold my 2000 n15 SSS (we only need one car...). Was directed here by Harun (RNZ11Z- GTST) and Cam (GTR_Cam - GTR dehh)

Anyway minimal mods so far (ie pod, stealth, Malpassi, 3 inch 5 zigen cat back) the first two done last night...and I still need decent mags cause the s15 ones just don't cut it...

I used to cruise quite often but of late have not had the time...hopefully meet more of you in the near future...I do venture to Milton on the occassional thursday as part of the redline or pulsar group...

Cheers

Neill

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For something a little more serious, Davinci Resolve is about the best there is for free video editors. No expiration dates or watermarks, completely free.
    • Well, it's taken me until the last week of 2024 to actually do something on the Skyline but I consider it a good head start to 2025's efforts! I managed to justify (to myself anyway...) my purchase of the lift table. It made taking the rear subframe out a lot easier than it would have been without anyway! Everything is out and stripped down ready for a clean then powdercoating.  She's pretty grubby under there but pretty good condition for a 38 year old Japanese tin bucket. 12 years of zero street time have obviously helped that... I need to decide which of the factory suspension arms I will keep and replace so I only get what I'm keeping powdercoated.  Baby steps but it's a start!  
    • Turbo gods, some assistance and recommendations please I'm looking into a turbo kit for my 2.5 from MX5 Mania >>>>> https://mx5mania.com.au/products/copy-of-mx-5-nc-2-5-litre-engine-conversion-turbo-2005-2013 Power wise I would like about 200kw atw, and of course dose noises, apparently if you keep a stock 2.5 under around 200kwatw the engine and drivetrain will not hate life even when ragging on it a bit Max RPM on the 2.5 is around 6500rpm The turbo MX5 use is something around the disco potato size as  packaging room for the turbo is pretty limited, which will, I believe, give me my power goals I want and not have the turbo either under, or oversized, but the rear housing bit is confusing  It comes with either a 0.64 or 0.86 From my understanding, which so far is based off googling, so make of that what you will 0.64: spools faster = good Makes more EGT heat on boost = bad Less topend power than 0.86 = I'm only looking for 200 atw so that point may be mute????, I don't know, hence my questions  0.86: Spools a "little" slower = how much slower??? remembering 6500 is my max rpm Makes less EGT heat = good Makes a little more power up top = again, power goals is only around 200 Also, this is a street car, so there will not really be any long track sessions, in saying this I would want it so it was happy with at least 3 hot laps at Wakefield Park if the need arises  I already have a fancy pants triple pass radiator, and a oil cooler with thermostat will be getting installed as well Thanks for any information or recommendations you have 👍, and of course, the comments about me wasting money on drive in drive out modifications, or any other snide remarks about my manhood for owning a MX5 🤣    
    • Tape some wool onto the vent then take it for a drive I did this to my reverse cowl and was instantly unhappy, as anything over about 60kph would have the wool enter the engine bay, thus just adding underbonnet pressure and stooging my coolant stack, it did let alot of heat out when stationary though, which really didn't help once the car was moving, with the reverse cowl you could watch the coolant temps cheap up the faster you went on the hwy, I assume it would be alot worse doing track day speed With the vented bonnet (just after the radiator and about 1/3 up the bonnet) on my old R33 the wool on the leading edge sat at about a 45° angle as air poured out of it From looking where your vents are, and their size, I believe you should be fine at speed and air should be evacuated from the engine bay, I think it will be a night and day difference when stuck in traffic though for removing the trapped heat, and not sitting there cooking when parked up after driving around... #convection  Post wool tuft pics and data for science  This beastie is one nice and unique rig, enjoy
    • It is possible to do this stuff for "cheap". But you need to be able to get deals on all the bigger items, and it really helps if you're fully capable of doing your own work. As soon as you're paying retail for new parts, or buying "kits" because you can't fabricate necessary bits and pieces, and if you really need someone else to take the reins of doing the work because you don't have the space/time/skills/confidence to  rip deep into the car and put it back together in a working fashions.....then you pay. And these days, pay means a lot of money. You'd think things would get cheaper, but they don't. They just seem to keep getting more and more expensive.
×
×
  • Create New...