Jump to content
SAU Community

Aerpro Din Pocket With Cup Holder.

W0rp3D

By W0rp3D,
in Exterior & Interior Styling

 Share

Recommended Posts

W0rp3D Grand Master

W0rp3D

Posted
Posted (edited)

Here is the unit im talking about, this pic shows a carbon fibre look on the front but the one i saw in super cheap is plain black.

FP9009.jpg

Has anybody used one of these?

If you have, i have a few questions.

1) does the cup holder have something underneath it to stop the can falling through?

2) is there enough room for it to be out and have drinks in it and not crunch your knuckles against it in 1st, 3rd and 5th in an R33?

3) is it easy to fit?

Any help would be appreciated.

Here is a link to the product page http://www.aerpro.com.au/list.php?pcode=FP...o=&cat_sno=

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/192367-aerpro-din-pocket-with-cup-holder/
Share on other sites
nissanskyrice Collaborator

nissanskyrice

Posted
Posted

I used the aerpro universal pocket without the cup holders and they fit in my R34 perfectly. The one i used had 3 different surrounds for it and i had to chop the edges a little on the smallest one to fit in but apart from that was fine. might cut it real close to the shifter with the cup holders though.

Jon88 Contributor

Jon88

Posted
Posted

hey mate,

bought one of these for my r33 ages ago, cost me $49 only to find out that the holes dont line up properly :rolleyes:

it would require redrilling holes into the metal bracket which i couldnt be bothered with at the time ay...

1) yer as you pull it out a small frame folds down to hold the drink.

2) when you have drinks in it i think it will just be in the way - i had a short shifter n with a maccas drink it would just hit.

3) mine just sat in there when i had it - you can make it fit so that the thin frame that pops on the front of the din unit sits over the plastic frame surrounding all the aircon unit and cd deck etc. however then its not bolted down. mine jammed in though so it doesnt really move.

also the small draw above the drink holder is not much good lol u cant get your fingers in there to get coins etc out and cd's just dont fit haha

cheers Jon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Hey, it's a GT-R, it's just as significant a moment as mine😁 It's not ideal when things are uncertain; I'm the type of person that always has a set plan for things in life so being unsure of this plan puts me in a weird place mentally.
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card style AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had no flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
×
×
  • Create New...