Jump to content
SAU Community

Recommended Posts

hey i was searchin on specs for my car, wen i came across r33 series having an optional active lsd..

is this true..and if so how can u tell..

lik i no most gtst came with just normal lsd diffs...

so does the active lsd option gtst have like a lsd light in the dash, etc

or traction control button..or anythin?

i read that you dash will have A-LSD on it, if u had it active lsd..this tru?

any info would b good...

and another thing do gtst evan have some type of LSD light?

Edited by bumble_bee
Link to comment
https://www.sau.com.au/forums/topic/192429-r33-active-lsd-option/
Share on other sites

I know Wayne (DJ Brave) has it in his ... factory option, not many in the gtst's around that I have heard of. Funky A-Lsd light in the dash, no traction control button... guessing it works similar as in the GTR's (v-spec's?) ???

Sensors detect loss of traction etc .... ask Wayne about his wet skid pan issues at Texicana!! lol

Haha, yeah... he was going on about it beforehand, then the moment he lost velocity in the car basically (sharp right hand 360 round a cone) it disengaged for some reason... you have to keep speed up a bit for it to work I believe...

I would shoot DJ Brave a PM...

Yep, there are SLIP and A-LSD lights on the tacho (see my avatar pic). SLIP for when the diff locks, A-LSD for when it fails (as far as i know/have been able to find out). I haven't had a problem with mine on the track or skid pan, but in general most people find them troublesome (probably because no-one knows anything about them). Paulr33 has looked into it..search for his thread.

Edited by govich
Yep, there are SLIP and A-LSD lights on the tacho (see my avatar pic). SLIP for when the diff locks, A-LSD for when it fails (as far as i know/have been able to find out). I haven't had a problem with mine on the track or skid pan, but in general most people find them troublesome (probably because no-one knows anything about them). Paulr33 has looked into it..search for his thread.

a "SLIP" light ay..

na cant say ive ever seen one or ever seen one come on b4 in my car..

same as the A-LSD light..

Mine works great. Cause really to be honest, for 99% of the driving you do, you want open wheel. Then when you need it locked, the computer does it for you, no fuss.

You can feel it lock in when there is any spinning at the back, ie three examples:

1) Say you're doing a tight u-bolt. Naturally you want freewheel for tight turning, then you decide to boot it a little on the 180 turn. The light comes on, both wheels lock, hey presto. You get traction again, it disengages.

2) Say you're cruising along the highway in the rain, and you take a gradual corner to fast. You have your foot on the accelerator a little bit too hard and the rear steps out a smidgen. Before you even know it's stepping out the light comes on and tells you you've got slip, both wheels lock etc, you can control it better.

3) You're on gravel driving along, the moment it detects any slip, it'll lock both wheels for the duration of the slip.

I thin alot of people don't like the A-Lsd's because it's not really progressive. It's either on or off. That can be a little discerning if you're not used to it. Especially if the moment you get the back out your first reaction is to jump off of the accelerator.

My understanding of the system is it that locks the diff based on the readings from the ABS sensors on each wheel.

Edited by insu

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...