Jump to content
SAU Community

Recommended Posts

Im thinking about buying an oil cooler for my GTT

But while searching I came across a thread where someone said that it can be bad to run an oil cooler with standard oil pump

no one replied with anything confirming or denying this claim

I was just wondering what ppl opinions would be on this subject

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/
Share on other sites

pfft, some poeple have no idea

just put it in, know one boots there car in the 1st 5 minutes of it running, it take bout 1 minite longer to get to normal working temp.

you wont notice it till you on the track and your oil temp wont go over a surtian temp.....

only install oil pump when your building the bottom end of ur engin and be sure to install a bigger sump.

xoxoxo

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3460681
Share on other sites

Im just a little concerned at my oil temp

cruising around town it sits on about 100

but lately with summer kicking in up here its starting to head up closer to 110 deg with air conditioner on

god forbid I head to the highway

water temp is fine

*this are taken from the factory gauges ,they may or may not be accurate

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461002
Share on other sites

pfft, some poeple have no idea

just put it in, know one boots there car in the 1st 5 minutes of it running, it take bout 1 minite longer to get to normal working temp.

you wont notice it till you on the track and your oil temp wont go over a surtian temp.....

only install oil pump when your building the bottom end of ur engin and be sure to install a bigger sump.

xoxoxo

Just curious, have you had an oil cooler and oil temp gauge?

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461041
Share on other sites

Im just a little concerned at my oil temp

cruising around town it sits on about 100

but lately with summer kicking in up here its starting to head up closer to 110 deg with air conditioner on

god forbid I head to the highway

water temp is fine

*this are taken from the factory gauges ,they may or may not be accurate

water temp and oil temps are related so if ones fine the other should be okay, those temps seems normal i wouldn't worry unless it goes above 125ish.

also the temps should be lower if anything on the highway due to more airflow and less revving.

if you don't do alot of hard driving or trackdays i wouldn't worry about an oil cooler.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461345
Share on other sites

battery Posted Today, 02:48 PM

just make sure you get a thermostat otherwise it will takes ages to get the engine up to operating temp and/or make the temps to low thus creating wear.

do most kits come with a thermostat or do you usually buy it as an extra, never really heard of a thermostat on an oil cooler

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461548
Share on other sites

Ideally you should have the oil temps close to the water temp again this will be effected by fitted oil coolers and power output etc on different cars.

have to say that 100 seems a bit high for cruising but i have found the factory gauge to not be all the acurate. still 100 is not damaging the oil i believe mineral based oil starts to break down around 125 again depending on the quality of the oil. But again 90 is better than 100, how dark is the oil when changed?

I may be wrong but oil pumps are positive displacement gear pumps so really shouldnt be an issue with a standard pump or after market, unless there is to much restriction in the cooler you use, resulting in oil pressure drop. and thats a bad bad thing!

I run 3 coolers on a standard pump ( well i think it is ) and had no issues yet, long may it continue.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461556
Share on other sites

Oil cooler is a waste for city driving.

Only a good mod if you hit the track, otherwise there is little benefit.

If you don't ever plan to hit the track then don't bother is my opinion. Quick fix= get oil temp. gauge and that will show you how hot the oil is in summer with air con. running.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3461576
Share on other sites

I never see my oil colour as it get changed by my mechanic

He uses royal purple and tell me that they are a pretty stable oil at high temps

but still In my mind its high

could putting a bigger turbo on it make it rise by 10 degrees its used to sit on around 90degrees with the old turbo

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3462269
Share on other sites

do most kits come with a thermostat or do you usually buy it as an extra, never really heard of a thermostat on an oil cooler

they usually don't come as part of the kit but u can usually get them as an extra.

I never see my oil colour as it get changed by my mechanic

He uses royal purple and tell me that they are a pretty stable oil at high temps

but still In my mind its high

could putting a bigger turbo on it make it rise by 10 degrees its used to sit on around 90degrees with the old turbo

you should make it a habit to check the oil level every so often when filling up.

i usually check the oil and tyres once every two weeks or so.

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3463403
Share on other sites

I've been told it isn't good to have an oil cooler unless it's intense endurance races?

My water temp will sit at 80ºC but my stock oil temp gauge has always sat at 70ºC.

I've been told this isn't good for my engine because the oil isn't warming up enough and can cause wear to the engine?

Link to comment
https://www.sau.com.au/forums/topic/192605-oil-cooler/#findComment-3465496
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have seen a case where the starter motor shorting against the casing caused a massive voltage drop + so much EMI that it caused all the sensors to spew garbage data at the ECU. Test the battery to make sure it has acceptable CCA/capacity first, I have gotten "brand new" batteries before that couldn't even power a 10W light bulb without dying probably because it sat in a warehouse too long without being charged. Only easy way to diagnose this 100% is put an oscilloscope on the battery and also look at key sensors to see if there's any clues.
    • There's a bunch of smaller shops that don't quite attract Singer money but are still hiring from that same pool of labor. Those are the body shops that you go to when you can't afford a Singer, but your old Porsche needs some serious bodywork. You can't exactly take those cars to the usual insurance body shops. When I say restomod, I mean they'll do something other than 100% OEM/OEM-equivalent aftermarket parts R&R. In the Porsche world this would be stuff like taking a 50k 964, doing a bunch of deferred maintenance/unwinding the nightmares the previous owners did to the car because a lot of people that own these cars tended to be penny wise, pound foolish types, then maybe some relatively simple off the shelf modifications to things like suspension, transmission, engine, headlights, etc. and you've spent 130k USD. When even the worst houses in the poor neighborhoods are worth 1M USD and the nice houses in wealthy neighborhoods are worth 3-10M USD suddenly 130k spent on a 50k car seems cheap.
    • Hoping to get a few ideas to help troubleshoot this issue, I'll try to keep it short.  A mate popped the motor in his 2018 LDV T60 with the 2.8 turbo diesel motor. He swapped it and I was his phone a friend when he got stuck.  The new motor is in, however it won't fire. The battery is literally brand new, when you crank it the volts very quickly (say 2 seconds of cranking) drop to 8 volts and the engine stops turning over. Watching the belts, I'd say they move about 5cm before coming to a stop. We put a booster pack on, no change.  The only potential issue I'm aware of is, when we pulled the motor the grounding strap was still attached. The strap copped a thrashing before we realised what was going on. It looks okay-ish but it's going to be replaced to rule it out.  The main challenge is, I wasn't there for 90% of the work. This is his first time doing any major work on a car and he was learning as he was going. He thinks everything has been put back together properly, however I'm not entirely confident that this is the case.  It would be good to get some ideas about what else to check. The car isn't spitting any codes so that doesn't help.  I've attached a photo, because why not lol.   
    • I mean an N1 came with a minimal paint thickness compared to dealer models. It’s probably had a ton of vinyls and stuff possible a race paintjob or two over the years. you don’t buy an N1 for its stunning good looks or comfort 🤣 you buy it to send it and measure how much air you can get on the hill at Bathurst
    • Yeah, but "restomod" implies Singer and things like it, which implies drug money / trust fund maturity.
×
×
  • Create New...